Ad #1428145 Posted:2009-11-04 10:03:41
This ad expires in 10 days.
SONNY'S EXTREME 892 C.I. 5.3 BORE CENTER
2070 H.P( NO NITROUS) 6.30's with auto trans
2070 H.P( NO NITROUS) 6.30's with auto trans

$85,800.00
NEW WORLD RECORD!!!, THIS SAME ENGINE COMBINATION JUST PROPELLED FRANK TAMEZ TO THE QUICKEST NATURALLY ASPIRATED ENGINE,(NO NITROUS) WITH AN OEM AUTOMATIC TRANSMISSION IN THE WORLD!!! HE RAN AN ASTOUNDING 6.38 @ 217 MPH, IN OVER 3000 FT OF AIR, WITH THE CAR WEIGHING 2445 LBS !! CONGRATS FRANK !!
ANYBODY ELSE WANTING TO ROTATE THE EARTH LIKE FRANK DID, WE ARE OFFERING A SPECIAL
THE EXTREME PRO STOCK 892 C.I.
2008 892 CU. IN. ENGINE WITH SONNY'S DESIGN
5.300" B.S. GM HEMISPHERICAL CYLINDER HEADS.
2075 NATURALLY ASPIRATED H.P.@ 8100 RPM 1410 FT. LBS TORQUE @ 6500RPM
Special Features:
*--Sonny's 892ci GM Hemispherical headed engine features Ultra Lite CNC program that weighs 2 lbs less than the 784 ci Hemispherical headed engines.
*--Sonny's 5.300" GM Hemispherical head has a 1.600" longer bore spacing than the 5.000" GM Hemispherical heads
*--Four Braswell 2bbl carburetors featuring 2.400" throttle bore feed pistons with 16.0:1 static colmpression
*--The cam has a gross lift of 1.200" with a 1.85 rocker arm ratio with .685 lobe liftl
*--The 5.300" cylinder head's intake runner has a volume of 652cc while the exhaust is 212cc which flow 660cfm @ 1.100" lift with a 2.725" valve on the intake and 470cfm @ 1.100" lift with a 2.100" valve on the exhaust
Sonny's in-house fully CNC ported "Next Generation" Hemi cyl. heads
SAR Special Billet Aluminum 5.300" B.S. block with 1.100" raised cam
Bryant billet crank
BME 426 aluminum forged rods
Venolia pistons
Jesel keyed lifters
1.031" tool steel taper-wall pins
Federal Mogul "Hell Fire" rings
Special titanium valves & PSI springs
SAR shaft mounted rocker system with needle bearing roller tips
Jesel belt drive
Daley 6 stage dry sump oiling
Star vacuum system
ATI balancer
MSD cranktrigger ignition
SAR sheetmetal 4x2 intake with linkage
SAR/BLP (4) 2 barrel split dominator carbs
Sheetmetal billet rail valve covers
Meziere hi-flow electric water pump
Pro series CSI starter
Fuel lines with 4 port regulator
This baby comes complete!!
ONLY 85,800.00
YOU SAVE 2000.00 OVER THE REGULAR PRICE
CALL TODD @ 509-710-6544 AND ORDER YOURS TODAY !!
Seller Phone Number: 509-710-6544
This item is NEW
Trades NOT ACCEPTED
Item Location: DEER PARK, WA Get Directions To This City
ANYBODY ELSE WANTING TO ROTATE THE EARTH LIKE FRANK DID, WE ARE OFFERING A SPECIAL
THE EXTREME PRO STOCK 892 C.I.
2008 892 CU. IN. ENGINE WITH SONNY'S DESIGN
5.300" B.S. GM HEMISPHERICAL CYLINDER HEADS.
2075 NATURALLY ASPIRATED H.P.@ 8100 RPM 1410 FT. LBS TORQUE @ 6500RPM
Special Features:
*--Sonny's 892ci GM Hemispherical headed engine features Ultra Lite CNC program that weighs 2 lbs less than the 784 ci Hemispherical headed engines.
*--Sonny's 5.300" GM Hemispherical head has a 1.600" longer bore spacing than the 5.000" GM Hemispherical heads
*--Four Braswell 2bbl carburetors featuring 2.400" throttle bore feed pistons with 16.0:1 static colmpression
*--The cam has a gross lift of 1.200" with a 1.85 rocker arm ratio with .685 lobe liftl
*--The 5.300" cylinder head's intake runner has a volume of 652cc while the exhaust is 212cc which flow 660cfm @ 1.100" lift with a 2.725" valve on the intake and 470cfm @ 1.100" lift with a 2.100" valve on the exhaust
Sonny's in-house fully CNC ported "Next Generation" Hemi cyl. heads
SAR Special Billet Aluminum 5.300" B.S. block with 1.100" raised cam
Bryant billet crank
BME 426 aluminum forged rods
Venolia pistons
Jesel keyed lifters
1.031" tool steel taper-wall pins
Federal Mogul "Hell Fire" rings
Special titanium valves & PSI springs
SAR shaft mounted rocker system with needle bearing roller tips
Jesel belt drive
Daley 6 stage dry sump oiling
Star vacuum system
ATI balancer
MSD cranktrigger ignition
SAR sheetmetal 4x2 intake with linkage
SAR/BLP (4) 2 barrel split dominator carbs
Sheetmetal billet rail valve covers
Meziere hi-flow electric water pump
Pro series CSI starter
Fuel lines with 4 port regulator
This baby comes complete!!
ONLY 85,800.00
YOU SAVE 2000.00 OVER THE REGULAR PRICE
CALL TODD @ 509-710-6544 AND ORDER YOURS TODAY !!
Seller Phone Number: 509-710-6544
This item is NEW
Trades NOT ACCEPTED
Item Location: DEER PARK, WA Get Directions To This City
Seller Phone Number: 509-710-6544
This item is NEW
Trades NOT ACCEPTED
Item Location: DEER PARK, WA Get Directions To This City
Ad posted by:
toddsrace (#56651)
Sonny's Racing Engines
352 Training Center Rd.
Lynchburg, Va 24502
509-710-6544 ![]()
Member Since: 2004-10-01
Phone Number: 509-710-6544
Member Feedback
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00
REPORT THE SALE, CLICK HERE
Member's Other Ads
- 16x16 SPINWERKES DBL. BEADLOCK RIMS
- Sonny's New 673c.i. 5 inch Bore Center Engine
- NEW XS LITHIUM BATTERY NOW AVAILABLE !!!
- 738 c.i. Buck Racing Engine, All Fresh
- 2005 NRC 35' M/HOME & 28FT ALUM. STACKER
- Sonny's New 864 5.3 Bore Space Wedge Engine
- Sonny's New 713 5.3 Bore Space Engine
- SONNY'S NEW 5.300 BORE SPACED WEDGE HEAD
- TRICK TITATIUM 8 5/8 BELLHOUSING
Your Recently Viewed Ads
- Ad #1645457: Clean Pro Built Spec Miata
- Ad #1580727: 50cc mini chopper runs great
- Ad #1587509: 73' Duster
- Ad #1676649: 2008 OPTIMA TOTERHOME AND TRAILER(DEMO)
- Ad #1531181: NEW 16V TurboStart AGM Light Weight Battery
- Ad #1588782: 1980 MALIBU $4500 ROLLING *NICE CAR* 8K T/K
- Ad #1408727: 28' Race Trailer For Late Model Car Texas
RESOURCE LINKS
- Financing
- Transportation/Shipping
- Purchase Protection
- Automotive

