I am selling a 400 sbc bored to 406. The engine was broke in on a stand, but never put in a car. I purchased a new block that has been cleaned and checked, just needs to be bored. I am selling the complete engine and the block that needs to be machined as a unit. The engine will be complete from carb to pan.
Here is everything it comes with, fully assembled.
scat I beam rods
pressfit speedpro hyper pistons that are 9.8:1
Dart Iron eagle heads 200cc intake runner and 72cc chambers
PBM erson valves and springs
pro comp full roller rockers
Arp studs and guide plates
cam craft hydraulic cam with .485 lift with 1.5 rocker
stock re-ground crank
melling high pressure stock volume oil pump
Holley 600 CFM carb
moroso 7qt drag pan with windage screen
edelbrock water pump
new edelbock intake manifold still in box ( weiand intake manifold is on it now)
aluminum valve covers
I also have a homemade break-in stand that I built with on off switch and push button start that I would let go with it.
many other things that I am sure I am forgetting.
Expires on: 12/30/2016
Posted: 09/09/2016, ad expires in 65 days
Seller Information Ad posted by:
Member Since: 09/09/2016
Phone Number: (515) 339-9453