This engine has also been internally balanced. It will need a 396 balancer from what the balancer told me. It has been built right just don't have the time and budget to finish it. Above Added: Sun August 14, 2016, 8:21 pm EST
I have a four bolt main 454 that has had the block stripped cleaned and machined. Has a new forged striker crank and forged h beam rods. Has probe forged domed pistons and all new bearings. Has a idly solid roller cam and roller lifters. Also has a high flow oil pump. Rectangle port heads with large valves and longer stems. Seat pressure is set for the cam and valve guudes have been cut for the loft of the cam. Also has the intake manifold in the picture to go with it that has been ceramic coated. Still needs rockers, push rods, and carbs. It has never been ran just looking to work on another project.