For Sale: disregard
Videos from 2014:
2013 Proven Chassis Limaland Super stock.
-NEVER bent or hit hard. The original bumpers are available, however the front has been bent/reworked.
-25 documented races from NEW on all parts unless specified otherwise.
-3 feature wins on car, 4 on motor at Fremont (outlaw), Montpelier (outlaw), Limaland (thunderstocks). 20+ top 5's.
Chassis - 2013 Proven (Ron Miller Race Cars) chassis - new build, not a conversion.
-Camaro clip (extends 36" past ball joint).
-Round tube chassis construction, under rail.
-1 3/4" cage construction.
-4" taller cage.
-Leaf spring with spring jack bolts, pull bar mount for 3 link/half leaf setup, or z-link right side option.
-Currently set up as a leaf/coil hybrid (one spring per wheel).
-Removable late model style rock guard.
-Silver metallic powder coating (some chips and wear).
-Late model style body with MD3 nose/fenders
-Winters 31 spline grand national floater rear end with sure seal inner seals (all new 2013).
-Hawk HP+ rear brake pads. New ceramic pads installed in front 2013.
-All new wheel bearings in 2013.
-Tube upper control arms.
-Low friction (QA1 lower, Afco upper) ball joints.
-Rear leaf sliders.
-Ohlins CCJ rebound adjustable shocks. (One needs repair)
-Camaro steering box with Howe 2:1 steering quickener.
-Sweet style power steering pump.
-Coleman driveshaft with 7" yoke (new 2014).
Parts on car:
-32 gallon tear drop fuel cell.
-Schoenfeld crossover headers (NOT 180)
-Bassett beadlock wheels with aluminum covers on all 4 corners.
-Hoosier emod tires.
-Longacre switch panel, 3 gauge panel and brake bias adjuster.
-Longacre Hot Lap 2 in-car timer
-Tilton dual master cylinder brake pedals.
-Hydraulic clutch pedal.
-Aluminum 2 handle shifter.
-Double pass radiator - Dominator shroud, outerwears screen. (new 5 races ago).
-Afco double pass radiator with dominator shroud.
-Fast shafts lightweight driveshaft (with long yoke)
-NEW complete tie rod assembly.
-NEW set of tube uppers with balljoints
- 1-2 sets of lowers
-Coleman floater rear end complete with axles (31).
-Pull bar .
-Several wheels/tires (most all beadlock).
-BSB spring mounts, bearing birdcage, Rayburn birdcage
1- Bert transmission. Mag body, aluminum tail. (10 races from fresh).
1- Bert transmission. Aluminum body, mag tail (tail has a weld). 0 races since fresh.
1- Lakewood steel bellhousing
1- mini starter
5.00, 5.83, 6.20 (damaged), 6.33 (yoke wobbles a little), 6.50 (10 races from new).
415ci built by Cattarene - currently 26 shows from fresh. Most all parts were NEW. 4 feature wins.
-Dart Little M block (4.125 virgin bore) - splayed mains.
-Callies Magnum XL 3.875" lightweight US crank. (26 shows from new)
-Callies ultra billet US 6" rods. (26 shows)
-Carrillo CP pistons. (26 shows)
-ARP bolts, head studs.
-Dart Iron Eagle Platinum heads. (30 shows)
-Ferera hollow stem lightweight valves. (30 shows)
-T&D shaft rockers. (30 shows)
-Isky tool room gold springs. (30 shows)
-Custom Huggins roller cam. (30 shows)
-Offset roller lifters.
-Custom Willy's 4412 carb.
-HVH Super Sucker adapter plate.
-Wilson manifolds spacer
-8qt circle track pan.
-Fabricated sheetmetal aluminum valve covers.
-R2C carbon fiber 4412 base
-R2C 4" air filter with polycarbonite lid, sure seal nut.
-Pertronix race-only HEI ignition.
-Holley fuel pump, QFT high speed/low speed regulator.
$12,500 race ready (less seat and belts)with spare suspension parts and anything exclusive to this car (extra wheels, gears, tires etc available additional).
$6500 roller less seat, belts, engine, trans, gear.
$6000 roller with steel pro shocks instead of Ohlins.
$7000 engine complete air filter to pan, with Earl's oil cooler and plumbing.
Additional spare parts will be available following sale of car.
This item is USED
Trades NOT ACCEPTED
Ad posted by:
Member Since: 2014-08-19
Phone Number: 419-722-8516
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00
- Member has no other classified ads.
Report the sale - click here