1969 Chevy Nova Pro Street - $23,000

$23,000
Private Seller - jlemery
Milwaukie, OR

Buyer Resources

Shipping

Compare shipping quotes and save up to 80%

Secure Transactions

Secure your transactions with Escrow.

Report This Ad

Item Details

Ad Number182774067
ConditionUsed

Description

Interior

Professionally installed headliner last summer by Beaverton Upholstery
Pro lite shift lite and oil pressure indicator
5” monster tack mounted on roll cage, voltmeter, oil pressure gage, water temp, trans temp
Painless 8 switch universal switch panel and 7 circuit fuse block
Remote master disconnect solenoid
Remote battery charge kit
B&M Pro Ratchet Shifter

Engine/Transmission
Ceramic coated (dark grey) valve covers and Edelbrock Victor Jr. intake manifold by Brooks Performance Coatings
Pro Form 950 race carb
502 BBC with less than 100 miles on entire drivetrain and chassis
Cam: Crane Cams Part number 168601
Lifters: Crane Mechanical roller lifters part number 13570-16
Valve Springs: Crane part number 99876-16
Pushrods: Manley part numbers 25793-8 and 25794-8
Speed Pro R10575 Rings
TCI street fighter turbo torque converter
MSD Distributor and ignition
GM Performance Parts Aluminum Oval Port Cylinder Heads part number 12363398
Crane stud mounted aluminum rocker arms
CSR Electric Water Pump
March Serpentine kit with alternator and aluminum power steering pump
Dual flex a lite fans with variable speed controller and aluminum radiator
TCI Turbo 400 transmission
Horsepower: 625 @ 5,900 RPM
Torque: 600 @ 4,600 RPM
Max. Rec. RPM: 6,000 RPM
Comp. Ratio: 9.6:1
Block: GM P/N 10237292, Cast Iron, Four Bolt Main, Short-Deck (Street/Boat)
Crankshaft: GM P/N 10183723, Forged Steel, 1-Piece Rear Main Seal, Externally Ballanced, Nitriated, Cross Drilled
Connecting Rods: GM P/N 10198922, Forged 4340 Steel, Magnaflux Inspected and Shotpeened, Heavy Duty 7/16 Diameter Bolts With Knurled Shanks, Pressed Pin
Pistons: GM P/N 12533507 Forged Aluminum, Std.
Piston Rings: GM P/N 12524293 Std.
Camshaft: Crane P/N 168601, Solid. Roller, Lift (.615 I, .636 E), Duration @ .050 (246 I, 254 E)
Timing Chain: GM P/N 12371053, HD Roller Design, Wide Single Roller Kit
Timing Cover: GM P/N 10230953, Timing Tab Molded Into Cover
Lifters: Crane P/N 16510-16, Solid Roller Factory Hold Down Style
Cylinder Heads: GM P/N 12363390, Aluminum, Oval Port, HV 290cc Intake Runners, Streetable 110cc SO Combustion Chamber, Sallee Chevrolet Race Shop Ported (Extensive Intake & Exhaust Porting), Angled Plugs.
Intake Valves: GM P/N 12366987 2.25 Stainless Steel, 11/32 Stem
Exhaust Valves: GM P/N 12366988 1.88 Stainless Steel, 11/32 Stem
Valve Springs: Crane P/N 99876-16, Dual, Roller Camshaft
Valve Spring Ret.: Crane P/N 99956-16, 7 Steel
Valve Lash: Intake .020 , Exhaust .020
Push Rods: Manley 1010 Steel, Swedged Ends, 25793 3/8 Dia. 7.625 L Stock Int., 25794 3/8 Dia., 8.590 L Stock Exh.
Intake Manifold: Edelbrock P/N 2904, Victor Jr., Oval Port (3500-7500 RPM), Single Plane
Ignition Timing: 8 BTDC @ 800 RPM, 36 Total @ 5,000 RPM
Fuel: 92 Octane Pump Gas

Chassis

Midwest Chassis and Automotive professionally installed back half
Tube chassis from the firewall back
Steel wheel tubs and sheet metal with embossed Chevy bowtie
Fabricated Ford 9” axle housing with Strange axles
4 Link with Strange coil overs
Wilwood Disc Brakes
New power steering gear box
Custom bent exhaust by Get Bent
TCI Roll stop
Kirkey 17” Pro Street Aluminum seats with black covers
New 5 point harnesses 2015
Mickey Thompson Sportsman Pro Front and Rear Tires

Paint and Body

No rust but paint is in fair condition. The areas above the wheel wells are in red primer from having them stretched when the car was back halved. There is also a dent in the front left fender. See pictures for details.
All lights and turn signals are functional
The underside of the car has been tastefully coated using 3M rubberized undercoating
3” Harwood Cowl Induction hood
Flat black front and rear fiberglass bumpers

Car is completely street legal and has a clean Oregon title. I am not interested in any trades of any kind. This car has not been down the track and has been driven 30 miles since I got plates on it. Asking $23000. Please contact me with any questions. Thanks for looking.

Email: jeff.lemery@gmail.com

Payment Details

TradesNot Accepted
Accepted Payment Methods Money Order, Cash

Message Seller

Send Message

About The Seller

PRIVATE SELLER
jlemery
Member Since March 2006
CONTACT INFORMATION
Milwaukie, OR 97222
Learn More
0 Honor Payments
No Achievements Yet
Honor Member Bronze Seller Silver Seller Gold Seller Power Seller
Get Transportation Rates

Location

PORTLAND, OR
Similar Classifieds
Email us - Support@racingjunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy


Execution Stats: 0.258 sec / 10.4 MB used / 10.6 MB peak