Fresh built Chevy 427: roughly 600/625hp on 90 octane non ethanol pump gas.
454 block 2 bolt. std bore and decked to .005 out.
427 steel crank. fresh.
NEW Aftermarket I beam rods.
NEW Forged mini domed Speed Pro pistons w/moly rings. (9.4-1 comp).
NEW Moroso deep pan and pickup.
NEW M77HV Melling pump.
NEW Double roller timing set with torrington brg and cam button.
Felrpo Cometic .052 head gaskets.
Closed chamber SQUARE PORT factory iron heads. ported with flow sheet, bronze guides
NEW 2.250/1.75 .100 longer S.S. valves. 16 hardened seats.
NEW C.C. springs, retainers and keepers, Shimmed to proper height.
NEW PRW 1.65 roller rockers.
NEW BBC stud girdle.
280/288 .680 lift roller (w/1.65 rockers). profiled cam sheet included.
New Lunati roller lifters
NEW Pro comp victor style ported intake to match. AN rear to front water hose upgrade for cooling.
NEW HEI dist with MSD 2 wire conversion and bronze gear.
New water pump.
Chrome tall covers with spacer added for clearance.
Complete less carb.
Can hear run on a fire up stand if needed. 1/2 hr break-in and 2 passes down the track. Ran 11.20 with 2000 rpm too tight a converter (needs a 5900 had a 3900 and carb to big. Had a 1250cfm needs a 1000 or 1050 cfm carb. All in a 3450 lb stock suspension powerglide Firebird. Went back to Pontiac power. :)