Not sure what year it is but it's an AC cobra fiberglass body with 90 inch wheelbase. I've just started pulling these parts out of the barn, so they are pretty dirty right now.
This was made to be a kit car, not a race body, so the fiberglass is thicker and has finished wheel well edges and hood, trunk and door jambs (not the rough edges that I've been seeing).
these parts were made by a group of people in Pennsylvania who were starting a kit car manufacturing company. This was 1 of 2 prototypes.
All of the fiberglass parts are as they came out of the molds and will require some finish work. These are nice pieces but the parting lines are still there.
Parts that are included:
Body shell patterned after the Factory Five body. headlight and tail light holes still need to be cut out.
2 outer door shells
2 inner door shells (still need to be bonded to the door shells)
1 hood with scoop and with inner shell bonded in place
1 trunk lid with inner shell bonded in place
1 instrument panel (most likely will need to be trimmed and fitted)
2 seat buckets, no frames or cushions
1 interior tub
2 front wheel well panels
1 trunk tub
1 chrome fuel filler assembly
hood and trunk hinges
1 dash support frame
I have trial fitted all of the parts and they fit nicely.
I do not have a frame or any suspension pieces. I also do not have an MSO#, title, or numbers of any kind.
My plan was to shorten a C3 corvette frame 8 inches but I just have way too many projects to finish this one.
May be willing to trade for the right classic car or truck project
Accepted cars or trucks older than 1973. maybe a tube chassis for drag car
Expires on: 12/04/2016
Posted: 08/14/2016, ad expires in 40 days
Seller Information Ad posted by:
Member Since: 08/08/2012
Phone Number: 614-975-0950