advanced search

1995 Nissan 240sx - $12,000

Private Seller - Chrisrw

Buyer Resources


Compare shipping quotes and save up to 80%

Report This Ad

Item Details

Ad Number182742862


Looking to sell the 240sx... Willing to trade for an NB Spec Miata. I might be making a huge mistake but who knows.

$12,000 for the car on the stock rims.
$12,750 for the car on a set of 17x9 enkei RPF1's wrapped in Toyo Proxes RR's.

I do have a brand new (never driven on) set of 17x9 Kosei K8R's wrapped in lightly used Continental Extreme Contact Wet's that I will include for an extra $1200. The rims alone are 1000 shipped from tire rack right now on a %15 discount...

I also have a full spare S15 SR20det engine coupled with an S15 6 speed transmission and S15 flywheel that I will sell for $950. The engine is about half way through a rebuild so that will need to be finished but once finished the combo is worth about 1700-1800. I was not too rushed to rebuild it as it is really a parts engine in case something breaks.

I will sell the car without any of the rims and the spare engine as I am sure I can sell them on their own if someone is trying to keep the price down. For $12,000 there is no way you could build this car again. I am losing a lot on this car but I would simply like to get a Spec Miata. For a donor car with an S15 SR20det (which you can find around) you're likely looking at 7.5K. A cage for 1.5K minimum and your looking at $3,000 extra for everything I've put into it.

The parts list on the car is a little crazy and and has changed a lot over the last few years so I won't bother listing everything. If you are interested I can either sit down and type it out or we can just chat about it. The basic's are:

- 1995 240sx LE
- 97 Kouki front end swap with 30mm fiberglass fenders and a Seibon CF hood (aerocatch pins)
- Origin Labs rear wing
- Full racecage installed by JJ Mendonca in Edmonton (great cage with double nascar doors)
- S15 Sr20det with numerous modifications including Z32 mac, 550c injectors, yellow jacket coils, alum pulleys, Grimmspeed manual boost controller, HKS SSQV IV BOV, tomei exhaust headers, Tomei down pipe, Tomei oil filter block, Greddy oil cooler relocation kit, setrab oil cooler, K&N intake, Alum catch can and coolant res, Koyo rad, Walbro 255 fuel pump, Exedy stage II ceramic clutch, GP Sports Spec R exhaust, and basically all SS lines with alum fittings.
- The suspension has been totally replaced including; Nismo power brace, Megan racing Coilovers, SPL Tension Rods, SPL Parts Toe Arms, SPL Parts Traction Rods, Cusco Upper Control Arms, Suspension Technique F & R Sway Bars, Tein inner Tie-rods with KTS outer tie-rod end, SPL Parts Subframe eliminators, etc.
- The interior has an NRG quick release, Sparco wheel, Sparco sprint seat (not installed as I am in the middle of changing mounts), and Schroth Racing 4in 5 point harness, etc.
- The car also has z32 front brakes

The car was corner weighted and aligned by Mike Thorn. It really drives well. It breaks my heart to sell this car as I have owned it since 2006, but I am very interested in trying Spec Miata.

The car has a few issues including;

- The CF hood was cracked and repaired. It is basically good as new but it's not cosmetically perfect.
- The windshield is cracked.
- The rear bumper has a small crack in it.
- The front fenders and front bumper are not painted yet.
- The front radiator needs to be shrouded and ducted. This is not exactly hard but NEEDS to be done to keep temps down. I had some of it done but got rid of it as I wanted to move the oil cooler... Which I have yet to get around to.
- The cars wiring is not great. The plan was to put in a painless kit asap, but here is where my lack of mechanical skill comes in. I would have to pay someone to do it. Basically, somewhere on the driver side of the engine bay, when turning right (and only right) the harness seems to ground out causing the engine to sputter. It only happens when the car is going fast enough to put strain on the chassis but it needs to be fixed before it can race again.

Text me on my cell if you are interested. The car is located in Alberta but I can meet a buyer at the Montana boarder. The car was imported into Canada from the US in 2006 so the importation would be as easy as driving it across the boarder. It already has all the american paperwork.

(403) 880-3250

Here are some more pictures:

Payment Details

TradesAccepted: NB Miata
Accepted Payment Methods Cash

Message Seller

Send Message

About The Seller

Private Seller

Member Since August 2016

(403) 880-3250

Learn More
0 Honor Payments
No Achievements Yet
Honor Member Bronze Seller Silver Seller Gold Seller Power Seller
Get Transportation Rates


Similar Classifieds
Email us -
Call us - 866.326.9227
Copyright © 2005-2016 All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy

Execution Stats: 0.281 sec / 8.3 MB used / 8.6 MB peak