Welcome to RacingJunk Classifieds, The World's #1 Motorsports Marketplace

For Sale: 1987 BMW 325is GTS 2/3, TT track car


Ad #182209936   Posted:2014-05-28 13:08:47

This ad expired 13 days ago.
$9,000.00


Priced to sell!! Drop to $9,000!!!
Above Added: Wed July 16, 2014, 9:57 am EST
For Sale: 1988 BMW 325is GTS 2/3, TT or just a dedicated track car.

UPDATE from original post: While selling, had found that the compression on the cylinders was a little low and erratic. So I pulled the head and had a valve job done, new valve guides and seals, 5 new valves, new head gasket, valve cover gasket, intake gaskets and all torx bolts. Runs smooth and punchy. Compression readings: #1 - 170, #2 - 170, #3 - 168, #4 - 160, #5 - 161, #6 - 165.

Here is original post.

Built this car from the ground up. Decided to switch classes and as much as I love this car, I’m putting it up for sale. Build can be seen here :

http://forums.bimmerforums.com/forum/showthread.php?1435735-E30-325is-to-Mwhat-build

Car was completely stripped to the shell, fixed any rust, rot etc.. Sand blasted, seam sealed, undercoated and painted. Almost every bolt put on this car was new. Ran it for 2 years in NASA HPDE and 1 year in GTS3. Extremely easy to work on and very simple throughout. The front frame is removable, with some experience you can remove the engine and trans out in under 2 hours. Car was in 2 accidents. One you can see in the build thread, the drivers front frame bent but did NOT get into strut tower. Bent it back, replaced parts and has raced it for year and a half later with no issues. The second was cosmetic damage on the front bumper cover, and rear quarter and fixed. It Has NASA logbook and all certifications required to race. Car weighs 2440 lbs. with driver and about ½ tank of fuel. Dyno sheet available.

Build Specs:
Exterior
1987 BMW 325is with custom wide body
DTM Fiberwerkz front and rear bumper covers
Fiberglass hood (weighs 16 lbs) with hood pins
Fiberglass front fenders
Custom Paint

Engine & cooling
1997 S52 engine with OBDI conversion ~60000 miles?
Headers to 3 inch single exhaust to Borla Race muffler out passenger side
Radiator with Spal pusher fan that runs off of thermo switch. (car runs @ 190 deg F on the track even at 100 degree days)
Engine is stock and is very reliable
Aluminum motor mounts
Welded / bolted skid plate

Drivetrain
Getrag 260 5 Speed
3.83 LSD (clutches may be worn)
Sachs racing clutch
JB racing 8 lb flywheel
Suspension & Steering
TCKline double adjustable Koni shocks
TCKline 500 lb. Front coilovers
TCKline 600 lb. Rear springs with adjustable perches
Ground Control Front Camber and Caster Plates
Turner Solid Control arm bushings
Turner Solid rear subframe bushings
Powerflex rear trailing arm bushings
Rear trailing arm tow and camber adjustment
22mm Sway bar F / 19mm Sway bar R with urethane bushings
Power steering delete with standard E30 Rack
Turner spherical rear shock mounts
All new tierods / control arms / bearings / bushings throughout at build

Brakes
Standard OEM rebuilt calipers
Hawk HT10 pads + used spare
Turner drilled rotors + used spare
All stainless steel brake lines at build
Tilton 2 pedal setup with separate front and rear master cylinders
Tilton pedal clutch setup
Spare master cylinders / sizes

Fuel
ATL Fuel cell mounted in spare tire in trunk. Good until 2015
All 6 AN SS braided fuel lines at build.
ATL racing fuel pump

Interior & Safety
6 point cage with Nascar bars on both sides
Fire extingwisher new last year
Shroth Window net / drivers net
Corbeau FX1 Pro seat
Corbeau 5 point harness with camlock
Temp / oil pressure / oil temp / fuel gages (oil pressure gage may need a new board?)
SFI 45.1 rated padding

Wheels
1 set of panasport 15 x 7 with used BFG R1 225/50/15 (2 have flat spotted)
1 set of kosei K1 Racing 15 x 7 with slightly used 225/45/15 Nitto NT01s
Turner wheels studs
H & R spacers

Car is sold as is. More pictures can be taken upon request

Seller Phone Number: 719-924-0230
This item is USED
Trades NOT ACCEPTED
Payment options:
Item Location: PUEBLO, CO Get Directions To This City
Contact Seller
This ad expired 13 days ago.
From:    To: 
Seller Information

Ad posted by:
Pueblopete (#712224)
Member Since: 2013-12-11

Phone Number: 719-924-0230

Member Feedback
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00

Contact Seller
Facebook
Twitter
Print Ad
More
Enter Friend’s Email:
  • Member has no other classified ads.

DID YOU BUY THIS ITEM?
Report the sale - click here



RacingJunk.com
106 Main Street, North Adams, MA 01247
Toll Free: 866.326.9227 • Tel: 413.663.3496 • Fax: 413.663.3615 • Email: support@racingjunk.com

Execution Stats: 0.366 sec / 16.0 MB used / 16.1 MB peak