For Sale: 97 BMW M3 GTS3 Racecar -- Fully built -- Turn
This car was built over the span of 2 years, has seen 4 track days, and is 100% reliable. It is a turn-key DE car and can be extremely competitive. No expense was spared on this build. All records in hand.
The cage was built by TC Design in Milpitas (now campbell) and is one of the best GTS3 cages to date. TC also helped with the suspension tuning and overall build of the car.
1997 BMW M3 Coupe in Cosmos Black
134,000 original miles
5 speed manual from factory
-Rebuilt and balanced S52 to factory specs with +0.20 mm
-Bottom end is all new oem stock components (the block, rods
and crank were the only components reused (rebuilt)
-The oil pump (nut, secured/welded)
-All bearings/seals were replaced with new oem
- The cylinder head has also been rebuilt with new spring retainers and lifters,
the cams have a custom cam grid (on the stock cams) for more power and
-Custom valve job and slight ported for more air-flow
-The engine has also been converted to OBD-I electronics (Pre-1996 year model e36's)
for easy tune-ability and reliability
-The s50 intake manifold is used
-Engine has 3.5 in air mass meter and bimmerworld intake boot, 35 lbs. injectors, Shorty tubular headers, Conforti chip (engine tune/software).
-Lightwieght flywheel with factory clutch kit
-City mufflers in concord built the exhaust system that is a custom 3 in.
from the headers back
-RLC Track Commander GPS based timing computer
-Fully stripped/tucked wiring
-Custom wiring harness also built for the car to run all the factory
lights, cluster, wipers, ABS and engine electronics (reduces over 30 lbs
of unnecessary wiring).
-TC Kline Double Adjustables
-Vorshlag Camber Plates
-Ground control race front swaybar and end links
-Rear swaybar removed
-All bushings/mounts, have been replaced with AKG urethane race parts.
-All new tie rods, and front control arms. SPC aluminum rear lower control
-3.91 custom built limited slip differential
-APEX Arc 8s 17x9 wrapped in Nitto NT01s
-Stock calipers with the brass caliper guides, stainless lines, pagid orange pads and euro floating front rotors
-Front brake duct kit
The car is located in Mountain View, CA and can be shown during weekends. If you are out of state, don't get discouraged to contact us.
We are asking $25,000.
Over $40,000 spent on this car.
Call or text 408-772-1275
Links to all images:
This item is USED
Trades NOT ACCEPTED
Item Location: SAN JOSE, CA Get Directions To This City
Ad posted by:
Member Since: 2014-02-24
Phone Number: 4087721275
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00
- Member has no other classified ads.
Report the sale - click here