For Sale: 1997 BMW M3 e36
The stock engine was rebuilt and balanced to factory specs with +0.20 mm
pistons. The bottom end is all new oem stock components (the block, rods
and crank were the only components reused (rebuilt). The oil pump (nut
secured/welded), all bearings/seals were replaced with new oem. The
cylinder head has also been rebuilt with new spring retainers and lifters,
the cams have a custom cam grid (on the stock cams) for more power and
torque. Custom valve job and slight ported for more air-flow. The engine
has also been converted to OBD-I electronics (Pre-1996 year model e36's)
for easy tune-ability and reliability. the s50 intake manifold is used,
engine has 3.5 in air mass meter and bimmerworld intake boot, 35 lbs.
injectors, Shorty tubular headers, Conforti chip (engine tune/software).
Lightwieght flywheel with factory clutch kit.
Custom wiring harness also built for the car to run all the factory
lights, cluster, wipers, ABS and engine electronics (reduces over 30 lbs
of unnecessary wiring).
TC Kline Double adjustable coil overs on all around.
Ground control race front swaybar and end links. Rear swaybar removed.
City mufflers in concord built the exhaust system that is a custom 3 in.
from the headers back.
All bushings/mounts, have been replaced with AKG urethane race parts.
3.91 custom built limited slip differential.
All new tie rods, and front control arms. SPC aluminum rear lower control
RLC Track Commander GPS based timing computer
This item is USED
Trades NOT ACCEPTED
Ad posted by:
Member Since: 2012-05-17
Phone Number: 6502455534
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00
- Member has no other classified ads.
Report the sale - click here