Welcome to RacingJunk Classifieds, The World's #1 Motorsports Marketplace

For Sale: RacingInTheDirt.com MOSER M9 HOUSINGS

MOSER The Leader in Performance Rear Ends


Ad #182167951   Posted:2014-03-27 06:31:21

This ad expired 74 days ago.



Moser has been leading the competition since 1986 and continues to provide industry leading products. We pride ourselves in our ability to supply quality America-made products, at an affordable price.
-
9" Complete Built To Order Center Section
Starting at $1275.00
-
Moser Custom Alloy Axles are without question the best in the business. Give us a call about spline’s and lighten services
-
Save weight without giving up performance. Moser offers hi-performance aluminum spools that weigh approximately 4 lbs. less than our steel spools. That doesn’t mean they are not as strong. In fact, the spools feature a thicker ring gear flange and large diameter mid-section for increased strength.
-
MOSER M9” WITH BACK BRACE, HOUSING ENDS. 4 LINK PLATES 5/8 HOLES, FILLER AND DRAIN. COMPLETELY WELDED BY MOSER
Starting at $1150.00.
MOSER SELLS THIS FOR $1205.00
-
The Moser M-9 mild steel housing was designed with racer in mind. Moser uses a 3/8” thick mild steel face plate that will accept either 9” or 9 ½” ring gears. The one piece triangulated housing design along with the bulkheads and gussets are manufactured from 1/8” mild steel. To further increase strength, 3" x .250 DOM tubing make this the strongest mild steel housing on the market today.
Each can is hand MIG welded and ground to an exceptional finish.
Housing includes; M/E logo fill plug, flush mount drain plug, vent and center section stud kit.
---------------------------------------------------------
9" Ford Competition Gears
Starting at $410.00
*Pro Gears are specifically designed for drag race only.
Moser Engineering stocks a full line of ring and pinion gears to fit most popular rears. These gears are CAD designed, CNC machined and computer control heat-treated to ensure you receive the highest quality and best performing gears on the market. We stock two types of ring and pinion gears: Pro Street gears are street/strip gears that are capable of handling most applications. Competition gears, also known as Pro gears, are meant for only drag strip applications and should not be used on the street.
------------------------------------
9" Complete Built To Order Center Section
starting at $1,275.00
Moser Engineering builds the strongest center sections available in the marketplace. Moser gives you many options from a Moser Stock Case to an Aluminumn Thru-bolt design all the way up to our Strongest Nodular case that can handle it all. Build the Center Section that you need and get that power to the ground. All our cases are good for street and or strip use.
---------------------------------------------

MOSER custom alloy axles starting at $370 per pair
Custom Alloy Axles 35 Spline Axles
Moser Custom Alloy Axles are without question the best in the business. We begin with premium quality “MADE IN THE USA” Alloy Steel that is forged right here in Portland, Indiana just blocks from our manufacturing facility using Moser designed tooling, induction heat-treated to optimize torsional strength, and 100% magnafluxed. This process not only gives the axle strength of a “race only” axle but makes it ideal for street use as well. The axles are specifically designed and engineered to take the stress and strain of both racing and high performance street uses. Our axles are available in any spline count and can be made to fit virtually any rear end setup. All popular bearing sizes and bolt pattern combinations are available. If your future plans call for a narrower rear, Moser Custom Alloy Axles can be shortened and resplined to fit your needs and bolt pattern changes can also be made.
These axles are Contingency paying axles and are approved by the following organizations:
NHRA
IHRA
NMRA
NMCA
---------------------------------
Spool & Axle Package (Bolt-In Axles)
starting at $595.00
9" Ford
Dana 60
8 3/4" Chrysler
*12 Bolt Chevy
*8.8" Ford
*Requires aftermarket 9" retention type housing ends
Spline: 28, 30, 31, 33 or 35
Includes our Moser Lightweight Full Spool, Custom Alloy Axles, ball bearings, up to 1/2 studs and retainer plates. Available in 28 to 35 spline. Custom made for your brake setup, including your choice of bolt pattern. Custom lengths to match your specifications. NHRA and IHRA major conting
We offer the complete line of Moser engineering parts.
Call, text or email us at
Scott 920-323-0071
Chris 920-645-9979
At racinginthedirt.com where are you one stop shop for all your mud racing needs, SCOTT & CHRIS have over 28 years each experience in Mud Racing, Truck Pulling, Sand Dragging and Off Road Trail Riding, RacingintheDirt LLC uses their experience to customize any products we sell for your specific need! In the meantime please feel free to check out racinginthedirt.com to contact us either through the contact page or by calling or texting us at the numbers below.
-
CALL OR TEXT RACINGINTHEDIRT FOR THE BEST PRICES AND SERVICE
Chris Boulet
920-358-5212
chris@racinginthedirt.com
-
Shane Ohlrogge
920-358-5198
shane@racinginthedirt.com
-
SCOTT Ohlrogge
920-358-5198
scott@racinginthedirt.com


Business Phone Number: WI 920-358-5198 or Chris in TX 920-358-5212
This item is USED
Trades NOT ACCEPTED
Item Location: CLEVELAND, WI Get Directions To This City
Contact Business
This ad expired 74 days ago.
From:    To: 
profile picture Business Information

Ad posted by:
RacingInTheDirt (#330085)

Racing in the Dirt LLC.
1231 West Madison Ave
Cleveland, WI 53015
(920) 323-0071
Business Storefront Contact
			Dealer
Business Website
Member Since: 2008-10-29
Phone Number: WI 920-358-5198 or Chris in TX 920-358-5212

Member Feedback
Number of Honor Payments: 1
Average Accepted Sale Price: $0.00
Average Honor Payment: $20.00

Gold Seller
Facebook
Twitter
Print Ad
More
Enter Friend’s Email:

DID YOU BUY THIS ITEM?
Report the sale - click here



RacingJunk.com
106 Main Street, North Adams, MA 01247
Toll Free: 866.326.9227 • Tel: 413.663.3496 • Fax: 413.663.3615 • Email: support@racingjunk.com

Execution Stats: 0.163 sec / 16.0 MB used / 16.1 MB peak