For Sale: Kawsaki Pro Mod Chassis with Vortex II REDUCE
Kawasaki Ward Vortex II 1500cc engine very little passes on since Paul Gast did all the engine assembly and matching everything to his perfection. Everything is top of the line with additional mild porting job by Ward. Chassis is a Koenig Kawasaki Pro Mod chrome moly 4130 roller powdered coated - ZX9 body candy apple red. Kosman light Front end 3 1/2" Outboard Support RC front and rear wheels. Brakes-Koenig and Grimeca. Rear tire 10 or 11 current pro stock 10” Catch Can, Inner Fender, Foot Pegs, Air in Frame, Air Shift Mount, fiberglass Side Panels. Aluminum Wheelie Bar.
All engine work and setup done by Paul Gast. Dyno by him 230 HP at the rear wheel. Has DYNA Dual coils DYNA Super pro 4000 with adjustable two step digital RPM read out. Vacuum pump and FBG 46’s Lectrons with power jets FBG 1-2-3 Auto trans billet gears and 18mm FBG welded and pinned crank, MTC slider with updated studs, mild Z14 intake and exhaust cams, Pro Light Pro Stock 18mm pistons. FBG new battery. Bike runs 8.00s 160mph plus (TG) with me as the driver at 250 lbs. Motor compression 295psi, leak down almost 0… NEVER has seen nitrous run VP 25. Light drivers you ready to run the faster numbers all on motor? Bike weight is 415lbs. NEW Goodyear slicks front and rear. Delay box, EGTs probes and Digatron unit is not included. Clutch cover will be the original MTC cover for the slider.
I am open to real and reasonable offers. Way too much to list and engine has all the BEST parts inside. Well over $35,000 invested in bike and motor. $15,000 WITH STARTER AND CART NEW.
WILL separate Chassis and engine should chassis sell first. Be realistic.
Call or text if you have questions. NO TRADES.
This item is USED
Trades NOT ACCEPTED
Ad posted by:
Member Since: 2013-07-10
Phone Number: 123
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00
Report the sale - click here