We now have an adapter that will allow you to run a 2-1/2 spring. Check out the video to see the tool in action! https://www.youtube.com/watch?v=6kgeRLPczIE
Above Added: Mon September 19, 2016, 5:11 am EST
JUST RELEASED THE BUMP STOP TOOL!!!This is the first and only tool of its kind to hit the market so here's how it works. Install the custom 3in. spring adapter just as you would any other adapter. The custom adapter is the ONLY piece in this kit that will be on the shock when the car is on the track. During practice, test, or at the shop if you want to make a bump stop change, leave the car at ride height, pin the BST top around the shock body, install SS rods to lower adapter (ONLY use provided hardware). Next simply push the quick pin through BST top and SS rod, making sure the pin completely through both sides of the top. Now jack up the car accordingly and as the suspension droops the BST will hold the spring compressed and the bump stops, shims, packers, will be exposed. Call or email for more info.
Above Added: Fri July 29, 2016, 2:15 pm EST
Dont spend all your time at the race track or at the shop taking rounds out to change the bump stops or adding extra weight and welding on tabs to run a bump rod. Use the Bump Stop Tool from Performance Machine & Fab. Installs in minutes and gives you access to the bumps without even removing the shock from the chassis. For more information contact us at Performancemach@gmail.com or (336)816-1892