For Sale: Superflow AutoDyn 30 Chassis Dyno (USED)
30” Mid Roll Single Eddy Current Dynamometer System
The AutoDyn 30 features a space saving center-mounted eddy current absorber
1200+ HP (895 kW) rated capacity, (traction limited)
900 HP (671 kW) peak power absorption (single eddy current) - UPGRADED - SEE BELOW -
30” ( 76.2 cm) diameter rolls, knurled
26” (66 cm) Inside 100” (254 cm) Outside track width
8,000 lb/axle (3,628 kg/axle) test capacity
225 mph (362 kph), high speed balanced
Air-actuated roll lock
Upgradeable, add a second eddy current absorber or change to All Wheel
Drive when your testing needs change
Data Acquisition and Control System:
2 Lambda sensor inputs standard, sensors not included
Stand mounted sensor box with 4 liquid crystal displays (LCD)
6 expansion bays for optional thermocouple, pressure, or analog inputs
Wired handheld remote control and display system
Ignition signal convenience package with Inductive ignition sensor clip
Real-time weather station (air temp, barometric pressure, humidity)
WinDyn software program
Perform single-gear or all-gear tests, wide-open throttle
Pit kit included
$$UPGRADES & EXTRAS$$
Upgraded the AD-30 roll set to Dual Eddy Current Absorbers which upgrades the AD-30 from 900 HP absorption to 1800 hp Peak absorption. 2400 HP rated capacity (traction will limit HP). Recommended for all uses with performance diesel trucks or extended EFI tuning.
2WD Above ground installation kit which includes a platform that fits to the rear of the autodyn and provides strapping area at the rear of the platform. Includes tie-down anchor points on the platform for securing vehicle. Does not have cat walks or safety rails, 32” off of floor surface. DOES NOT INCLUDE RAMPS. RAMPS OR 4POST LIFT MUST BE ORDERED SEPARATELY.
OBDII which allows the operator to plug into the OBDII port on the vehicle and record data from the vehicle onto the dynamometer test data. Displays OBDII data in WinDyn as a channel.
Complete Air/Fuel Meter Kit for NGE Systems. Kit works with AutoDyn, Kit includes AFM-1000 A?F meter, interface able with lomo connector.
Temperature Sensor Expansion Kit. Includes 10-channel pressure panel, and 4 pressure transducers. Ranges: Oil Pressure 150PSI, Manifold Pressure 200 inHg, Fuel 1 150 PSI, Fuel 2 150PSI. Hoses and connectors are required for pressure transducers to operate and are not included.
Tail Pipe Probe which measures the air/fuel data directly from the tailpipe. Perfect for when you cant install a weld fitting directly in the exhaust pipe, works with any lambda kit. Kit includes sensor housing and Venturi vacuum pump. Standard probe kit is 12 inches long (30.5 cm); extension probe is 18 in. long (45.72 cm) Requires regulated shop air 30psi max.
This item is USED
Trades NOT ACCEPTED
Instructions for buyer: Buyer responsible for pickup/shipping.
Ad posted by:
Member Since: 2014-06-26
Phone Number: 713-896-7326
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00
- Member has no other classified ads.
Report the sale - click here