Edelbrock RPM Performer Cylinder Heads - $838

Wake Up Your Oldsmobile!

Contact (877) 678-6448
$838
Business Seller - Borowski Race Engines, Inc.
Rockdale, IL
Report This Ad

Item Details

Ad Number182784302
ConditionNew

Updates From Seller

Price of $838.08 is for a bare single head, either hydraulic flat tappet or hydraulic roller.

Assembled prices are:
Hydraulic flat tappet: $1,029.50
Hydraulic roller: $1,059.39

FREE STANDARD SHIPPING IN 48 STATES Above Added: Tue October 25, 2016, 12:57 pm EST

Description

After 40-50 years, don't you think its time you treat your Olds to a new set of great aluminum heads? Let your engine breathe with a modern design and shed a bunch of weight in the process!

Those tired old iron heads were not designed for today's low-octane, unleaded gasoline. All else being equal, we find these aluminum heads will allow us to add a full point of compression on an engine build. That translates to a big jump in power. Why? Because aluminum is a much better conductor of heat than iron and that keeps detonation in check.

Just bolting them on? You'll still get the better air flow, lower weight and finally get to do something about that knocking.

Want even more than you'll get straight out of the box? Call us to tune these heads up any way you want them. We can also help you with any other parts you might need for your build.

By the way, the picture above is posted on our Facebook page. With a set of these heads and a hydraulic roller cam, this bad boy pushed out an amazing 548 lb-ft of torque and 502 hp.

Features:
Cylinder Heads designed for high-performance non-emission 1965-76 Olds 400, 425 and 455 c.i.d. V8's
Heart shaped chamber for a more efficient burn, outstanding horsepower and torque
Valvetrain has been upgraded from the factory pedestal-mount system to an ARP 7/16" screw-in stud and 3/8" pushrod-slot guideplate for increased valvetrain stability

Cylinder Head Specifications:
Combustion chamber volume: 77cc
Intake runner volume: 188cc
Exhaust runner volume: 106cc
Intake valve diameter: 2.072"
Exhaust valve diameter: 1.68"
Valve stem diameter: 11/32"
Valve guides: Manganese bronze
Deck thickness: 5/8"
Valve spring diameter: 1.46"
Valve spring maximum lift: .575"
Rocker stud: 7/16"
Guideplate: Hardened steel
Pushrod diameter: 3/8"
Valve angle: 18°
Exhaust port location: Stock
Spark plug fitment: 14mm x 3/4 reach, gasket seat

Questions? Please call us at 815-725-2727.

Buy your parts from people to use them!

Payment Details

TradesNot Accepted
Accepted Payment Methods Paypal, Money Order, Credit Card, Cash

Message Seller

Send Message

About The Seller

BUSINESS SELLER
Borowski Race Engines, Inc.
Member Since October 2008
CONTACT INFORMATION
1545 Mound Road
Rockdale, IL 60436
1-877-678-6448
877-678-6448
BUSINESS WEBSITE
borowskirace.com/Index.html
Get Transportation Rates

Location

JOLIET, IL

Buyer Resources

Shipping

Compare shipping quotes and save up to 80%

This item ships from 60436
Secure Transactions

Secure your transactions with Escrow.

View All Ads From Seller

More From This Seller

  • Borowski Custom 4L80e from Hughes Performance

    $4,498
    Rockdale, IL
  • 427ci Nitrous LS7: 660hp on Motor, 880 hp on Spray

    $21,500
    Rockdale, IL
  • Silv-O-Lite Chevy 283 Cast Pistons - .030 Over

    $100
    Rockdale, IL
  • Borowski Race Engines Shirts, Hoodies and Flex-Fit Caps

    $20
    Rockdale, IL
Similar Classifieds
Email us - Support@racingjunk.com
Call us - 866.326.9227 (Toll Free)
413.663.3496
Copyright © 2005-2017 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy


Execution Stats: 0.230 sec / 10.4 MB used / 10.7 MB peak