email me at: AIRVEGAS@MSN.COM OR CALL 702-862-9142. I DO NOT CHECK MESSAGES ON HERE EVER
Above Added: Fri September 30, 2016, 12:05 pm EST
I have many different sets of springs/retainers, etc. They are already cut for 1.550 springs. If you need them, I can install them no charge once they are paid for
Above Added: Fri September 30, 2016, 12:04 pm EST
Set of SBC Gen 1, 340292 Angle Plug "Turbo" heads, complete. Factory angle plugs, push rod guide plates, 3/8" screw in studs, 63 cc chambers, 2.02 and 1.60 valves, Professionally ported and polished for street and strip use. They can be ported much more if you are using them just for racing. These were GM Service replacement heads only available over the counter back in the 70's and mostly sold specifically for racing use. These are the heads Every Pro Stock Chevrolet car used up until they went to BBC engines in the 80's. It was the best head Chevrolet made for the Gen 1 SBC engines. These heads are complete and ready to bolt on with a recent touch up of the valves, spring pressure set for a hydraulic flat tappet cam (the heads can be set up for others cams if needed). I also renewed all the valve seals as you can see if the photos. Other then mild port work, the heads have never been modified and are bolt on ready right now. The heads are now completely assembled and bolt on ready.