Welcome to RacingJunk Classifieds, The World's #1 Motorsports Marketplace

For Sale: Best flowing factory type iron 429 460 heads

Barnett Eliminator



Barnett High Performance

This $1750 price is for the BARE heads only!
We accept paypal with an added fee.
Your choice of and of the 3 heads.
No shipping cost no Tax for Michigan residence

We helped design these heads.
They are available now.
Soon to come aluminum.
These can have both CJ and A460 type intake ports with stock valve angles.
The CJ heads have both BBF and BBC exhaust flange
The A460 have just the BBC exhaust like an a460 head.
The A460 heads has a slightly filled floor for higher velocity lower runner volume. This can be ported out the standard A460 port or intake manifold floor can be filled to match. See pictures on gaskets traced on intake ports.
They have 74-78cc combustion chambers. depending on valves used.
The SCJ intake runner 318 cc SCJ exhaust runner 134cc
The A460 intake runner 320cc BBC exhaust runner 138cc
The basic machining is being done in at Eliminator Products and can be finished at Barnett High Performance.

pricing will be as follows
$1750 per set no valve job iron guides sized to .343 and no seats
Add bronze guides $200 installed
Add hardened exhaust seats made from Tungsten $160 installed
Performance valve job $220
High Performance valve job and bowl blend $600
Spring pockets cut for bigger diameter valve springs
Complete heads street type valve job, iron guides, valve train setup for .600 lift or less flat tappet or hyd roller $2700
Complete heads race type valve job, iron guides, valve train setup for .800 lift or less solid roller titanium retainers $3400
Mix and match, BBC exhaust BBF exhaust, SCJ intake runner, raised floor A460 intake runner.

We did a quick valve job on these for flow bench testing.

Port flow with industrial/street type valve jobs no tricks no back cuts no extra work with 2.25 intake 1.72 exhaust valves
F460 or A460 intake 370cfm @.900
BBC or High Port exhaust 274cfm @.900
CJR or SCJ intake port 365cfm @.900
SCJ exhaust 220-240 depending on valve job
Later we did a 5 minutes of short turn work with a sand paper roll and gained 15+ cfm on both ports
These prove to be the highest flowing FACTORY VALVE ANGLE 460 heads made period.

Several years ago Tim Barnett approached friend Mike Bowery (Eliminator Products) about filling the need in the 429 460 market for a new iron performance 460 head. Primarily Tim Barnett wanted something for the truck pulling and hot street application. The need was great as no one but Eliminator was making factory valve angle iron heads. The heads Mike was producing was more for industrial application then anything. Tim Barnett ported a set of Mikes industrial heads to see what they could do, and the numbers were good but not good enough. Mike decided to build a totally different head and have it be more like the original CJ heads. Tim Barnett helped supply several CJ ports to Mike for making patterns and helped check market to see if these type of heads would be good. The EX 514 head currently unavailable was the only iron 460 performance head being made. Mike and Tim together with several smart guys got together and made many improvements of the original heads in performance, durability and user friendliness. Mike got ideas from other guys to also produce a iron A460 type head. Mike decided that was a ok idea and at the last second decided a genius idea of making an A460 heads with still factory valve angles. The reason many racing classes state heads have to be factory replacement and some say factory valve angles only. This opened up a whole different power level available to these heads. A460 has larger intakes ports and manifolds with more volume then the standard CJ intake manifolds.
Now a long time later these heads are here. First castings have been done Tim Barnett has tested different valve jobs and different valves for both industrial and performance application and the flow and quality is Great!

Message Seller

Business Phone Number: This user has not entered a phone number yet.
Send message to seller below.
This item is NEW

Payment options:

Item Location: LAINGSBURG, MI Get Directions To This City

Ad #182249126
Posted: 08/23/2014
From:    To: 
Message Seller
Business Information
Ad posted by:
TimBarnett (#303855)

Barnett High Performance
Laingsburg, Michigan 48848
(517) 719-5185
Website: http://barnetthighperformance.com

Member Since: 07/06/2008

Print Ad
Enter Friend’s Email:
  • Member has no other classified ads.

Report the sale - click here

106 Main Street, North Adams, MA 01247
Toll Free: 866.326.9227 • Tel: 413.663.3496 • Fax: 413.663.3615 • Email: support@racingjunk.com

Execution Stats: 0.151 sec / 6.8 MB used / 6.9 MB peak