NecksGen now offers 3 sizes, a Large unit which fits most adults, typically a driver over 5'6" and over 100 lbs. Their Medium is for drivers 5' to 5'6" and over 100 lbs. Compared to the large unit, the medium is 1" narrower in center. NecksGen also offers a Youth unit, which fits small torso drivers, typically youth drivers between 7 and 16 years old who are under 5' and 100 lbs. Compared to the large unit, the youth unit is 1" narrower at the neck and 1" narrower at each shoulder platform where the seat belt goes (to accommodate only a 2" seat belt).
Above Added: Sat December 29, 2012, 10:04 am EST
The NecksGen is the next generation of Head and Neck Restraints. Made in the USA and fabricated from DuPont carbon fiber composite material. Not only are these materials lightweight, but they are extremely strong. The NecksGen has passed all SFI testing and is currently SFI 38.1 Certified and tagged.
1 size fits most adult drivers.
Accepts 2” or 3” seat belts. The side wings keep the shoulder harness belts in place under impact or loose belt conditions. The guides on the upper chest area keep the unit centered on the driver at all times, not allowing the unit to slip from under the belts.
The unit is adjustable to fit most seat angles from 10°-40°. This also allows the driver to adjust the back of the unit for comfort as well as interference with the helmet or seat.
The low profile design allows easy access from confined areas with no interferance on roll bars.
The body forming Kevlar pads fit under the seat belt, therefore taking any pressure off the collar bone and making the unit very comfortable.
Offers a full range of head motion while still providing side and angular impact protection.
Quick release hardware.
Included with the NecksGen: Quick-Release & Hard Mount Helmet Hardware, Flex-Fit Cap, Decal Kit, Patch & Carrying Bag (does not include helmet)