Welcome to RacingJunk Classifieds, The World's #1 Motorsports Marketplace



Ad #182233823   Posted:2014-08-26 07:16:36

This ad expired 79 days ago.

At Leatt, we knew that current head and neck restraint systems were good. They have saved drivers worldwide from countless neck injuries, and saved some lives as well. But they could, and should, be improved upon. We are proud to now offer that improvement, the Leatt MRX head and neck restraint system.
Comfort is a big issue. We knew we could increase driver comfort dramatically by creating a flexible chassis and adding a thick layer of fire retardant Nomex® padding between your body, your neck and the device. This chassis also has collarbone cut outs and it molds itself better to more body shapes. The flexibility of the device also results in optimal head control, bringing the head and tether angle to an ideal orientation for maximum energy uptake that also results in decreased neck forces during the entire crash sequence. Our padding adds more uses than just comfort, it reduces helmet to device impact spikes creating a softer hit/feel. Rubber bumpers on inside of rear collar also act to decrease these spikes. (Fire retardant testing, done by SFI, using the ISO 3795-1989 standard.)
Containing the harness straps into our unique channels achieves both safety and comfort goals. Side and front angle impacts, as well as normal off road racing, causes some head and neck restraint devices to slide out from under the harness straps. The harness straps can then cause tissue damage to the soft parts of the neck and these straps not being properly placed on the device for the whole crash sequence limits its effectiveness. Our containment channels and high belt traction surfaces help prevent that.
The MRX features ultra strong Kevlar® tethers that have an elongation of only 2-4%. This helps the device take up forces earlier and compares very favorably against the 7-18% elongation of other devices with tethers made of inferior materials.
The MRX far surpassed neck tension, neck compression and NIJ testing parameters set by SFI.
SFI 38.1 tested and approved for optimum protection at over 70G
Unique combination of premium comfort and full protection
Exclusive flexible chassis design for great fit, comfort and a smoother and more controlled neck force reduction and head deceleration
Single collar angle design that allows perfect fit and functions with all seat angles
Fits all types of 2 & 3 inch harnesses
Collarbone relief area for improved fit and comfort
Fire retardant Nomex® washable padding for greatly improved strapped-in comfort and reduced harshness of helmet to brace impact
Chassis made of an advanced, fire retardant, high tensile PC composite
Harness channels reduces the risk of the belts coming off the device after first impact
Harness channels guides the belts away from the soft tissues of the neck
Quick release fire retardant Kevlar® tether system for both frontal and side impact protection
Sliding tether for improved field of vision, head movement and driver comfort
Anchor post kit with wrench included. To replace HANS posts or fit pre-drilled helmets
Weight approx. 900g
Patented, in the US, by Leatt in 2010
One Size fits XS-3XL

Business Phone Number: 704-871-0721
Business Phone Number2: 800-468-2279
This item is NEW
Payment options:
Buy It Now
Item Location: STATESVILLE, NC Get Directions To This City
Contact Business
This ad expired 79 days ago.
From:    To: 
Business Information

Ad posted by:
glnmaurer (#67349)

Circle Track Supply
304 Fifth Creek Road
Statesville, NC 28625
(704) 871-0817
Business Storefront Contact
Business Website
Member Since: 2005-01-12
Phone Number: 704-871-0721
Phone Number: 800-468-2279

Member Feedback
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00

Print Ad
Enter Friend’s Email:

Report the sale - click here

106 Main Street, North Adams, MA 01247
Toll Free: 866.326.9227 • Tel: 413.663.3496 • Fax: 413.663.3615 • Email: support@racingjunk.com

Execution Stats: 0.074 sec / 6.5 MB used / 6.6 MB peak