Leakdown Tester for Mechanical Fuel Injections-Leak Down
Check you barrel valve leakdown in order to set your idle .
Test Valves for accurate opening pressures
"A MUST HAVE for INJECTION TUNING"
Reads correctly : 30% =30% not backward like some others.
Quit guessing at your flow and leakdown!
A racer's must when it comes to Troubleshooting and Tuning your System!
Easily checks the following components:
*High-Speed Lean-Out Checks
*Cylinder Leak Down
Measure your leakdown and flow pressure with this gauge.
When setting up a mechanical injection, you need to set your leakdown percentage.
This gauge enables you to do just that!
You can check your opening pressure and cracking point of your bypass valves, secondary valves, and Hi Speed lean out valves.
This gauge is included in my Set Up Kit for setting up a Hilborn or Enderle Injection system.
Set up with #6 fitting #8 AN Fitting
With 18" hose with #6 and #8 fitting for Barrel Valve
Comes with male fittings to attach to Female #6AN and #8AN
Choose product option and it will also attach to Male #6AN and #8 AN Fittings as we
Paypal, Money Order, Credit Card, Cash
Expires on: 01/10/2017
Posted: 10/18/2016, ad expires in 80 days