Will consider trades. Surprise me!
Above Added: Sun March 13, 2016, 10:12 am EST
Above Added: Thu September 3, 2015, 1:54 pm EST
Above Added: Thu February 26, 2015, 5:43 pm EST
I just uploaded two dyno printouts...one on race fuel, the other on 93 octane pump fuel. These pulls are the result of some additional tuning.
Above Added: Wed February 11, 2015, 6:21 pm EST
A pair of 700 inch, PSI supercharged, fuel and methanol injected, steel block Merlin big-block Chevy 1600+ horsepower racing engines built by Bruce Baker of Express Engines Inc. These engines are completely fresh and have dyno time only on them. Here are the specs:
696.4 CI, SCI - PSI - Static Compression Ratio 7.98:1
Steel Block Merlin, 11.625" deck With Olds Mains. Bore is 4.595", Roller Cam Bearings
Crankshaft - Bryant Racing 5.250" stroke, B.W. 2686 - Olds Mains w/ Coated Bearings & Hemi Rod Size w/ Coated Bearings
Pistons - Custom CP Pistons 4.595 Bore with Buttons & Heavy Wall 990-2.930-24ENS Wrist Pins - Rings 1/16" x 1/16" x 3/16"
Carrillo H beam Rods with 7/16" SPS Carr Bolts
Camshaft - Mechanical Roller - Crane R-272/438-2S-14 SFO 55J
Jesel Key-Way Roller Lifters
Jesel Belt Drive System
ATI - Damper
Crankshaft Front Bearing Support System
Dry Sump Oil Pan
Stock Car Product 4-Stage Dry Sump Oil Pump with oil line to oil pan with a Weldon Fuel Pump
Hardin Marine thermostatic Oil filter with HP-6 Oil Filter
Dart Big Chief Cylinder Heads 18 Deg - Ported - Titanium Intake Valves & Extreme Duty Exhaust Valves with PSI Valve Springs 2.050 @ 275 Lbs & .745 @ 677 Lbs with Titanium Retainers
ARP Pro Head Studs
Trend 1/2" Dia Pushrods
Jesel Shaft Mounted Rocker Arm System
Big Chief Alum Valve Covers with breather tubes
Indy Intake Manifold
Whipple Intercooler FOAC
PSI 206B? screw supercharger with 14 MM Poly Chain Blower belt, idler, and pulleys. Includes 48, and 49 tooth 14mm drive pulleys, and 24,26,30,32, and 34 tooth driven pulleys for tuning with both pump and racing fuel. There are 16 Injectors total, 8 in the hat and 8 in the intake ports. Autronic SM4 EFI System provides fuel delivery, and methanol under boost. Ignition provided by 8- MSD Coils and ignition wires.
Custom Built Hardin Marine 4 Stage Sea Water Pump with Stainless Bodies Two stage feed engine and other two stage feed intercooler
Dual Oil Cooler Flywheel housing with 15 plate oil cooler on port side and 8 plate oil cooler on stbd side for gear box
10 Pin Mercury Engine Harness and Alternator with Front & Rear engine Mounts
Steel Billet 24 Lbs Flywheel with ARP Bolts with Dual ring gears for either block or bellhousing mount starter
Crash Box Drive Plate 2" X 10 Tooth Splines 16 Bolts ARP
Rear Mount Starter & block mounted starter
CMI Stainless Short-E-Top Headers
These engines are built for extreme reliability, and are built with the best parts that money can buy. Dyno time/tuning only. Sale price includes both 93 octane and race gas tunes for different applications. There are 10 different pulley combinations available with included blower pulleys. These engines make over 1000 lb-ft of torque at 3500 rpm, and have a torque peak of 1475 lb-ft at 5600 rpm. Max hp is 1605 at 6000 rpm. More power available with some fine tuning.
Engines can be dynoed for serious customers.