4.550 bore and hone is fresh. We can supply pistons and rings if need be. Do have a full set of 8 Diamond 4.530 Pistons for this motor. They only have 3 pulls on them.
Above Added: Mon September 26, 2016, 8:34 am EST
•KB Olds Solid Aluminum BBC Block. Has been windowed but professionally repaired and ran since – 10.500 Deck, 4.550 Bore, 54mm Babit Cam Bearings – Receiver Grooved – Straight Cam and Main Bores. Head Studs and Hardware.
•2nd KB Olds block. For spare parts like head studs, main caps, head studs, 4.500 Sleeves or mock up block. (not runnable)
•Callies Dragon Slayer Crank – BBC Mains & Rods, 4.250 Stroke – Dual Keyway - .010 on the mains “this crank came this way direct from Callies they turned it to small in final machining"
•GRP Rods – 7.050 Long C/C – 1.094 Pin End – 3 Passes on Rods
•Trend Performance Wrist Pins – 1.094 Dia. – 3.125 OAL – Tapered and DLC Coated
•Titan Billet Oil Pump w/ Steel Shaft
•KB Front Cover & Gear Drive
•2 Dan Olsen Funny Car Oil Pans
•Bullet Custom Ground Cam – 54mm Journals
•Comp Endura-X .904 Lifters
•Dart 18° Solid Big Chief Heads – 2.400 Intake Titanium Valves – 1.900 Titanium Exhaust Valves – O-Ringed – Titanium Retainers – Triple Springs –
•T&D 1.70 Ratio Shaft Mount Rockers & Stands & Spare Rocker and Parts
•Manton 7/16 Push Rods
•Hogan’s Sheet Metal Blower Manifold w/ Burst Panel
•Sitko Crank Support with mandrel for belt drive fuel pump
•Sitko Blower Hub w/ Degree Ring
•Dart Cast Aluminum Valve Covers w/ RCD Burn Down Tubes
$10,000 Or Best Offer. Motivated Seller. New Motor Is On The Way. This One Needs To Go.