758 Pro Mod Hemi Head Motor and parts - $1

Turbos,liberty, titanium,Radios, scales

Private Seller - jdmtrspt
Taneytown , MD

Buyer Resources


Compare shipping quotes and save up to 80%

Secure Transactions

Secure your transactions with Escrow.

Report This Ad

Item Details

Ad Number182702014

Updates From Seller

Side exit exhaust headers sold
Titanium Bellhousing sold Above Added: Sun July 3, 2016, 6:47 pm EST

Liberty transmission sold
Shifter and air bottle sold Above Added: Sun July 3, 2016, 6:44 pm EST

Jesel Belt drive distributor-Sold
Generac Generator-Sold
NOS Purge kit -Sold Above Added: Mon June 13, 2016, 12:16 pm EST


Pro- Mod Motor-_
758 Sonny’s Hemi Head Billet block 5 inch bore Mountain motor-EFI Injection systems.
Fresh motor with Dyno sheets and dry nitrous setup. Hemi heads by Sonny’s Performance, with Titanium valves, Jesel rocker arms, Manton Push Rods,Carbon fiber valve covers, 5 inch bore billet block (never damaged) Moroso split pan with 4 stage dry sump. 3 stage Edelbrock dry nitrous system, Moroso Vacuum pump, Jesel belt drive and Belt driven distributor, GRP rods and CP pistons. Fuel injection and throttle bodies system by EFI. Motor will come with spare rods, push rods, new Valves, new Bullet cam, New Pistons, Valve springs, additional throttle bottles and all notes on the motor. The motor also has the EFI system and notes on a laptop computer. The Motor only has 5 1/8 mile passes on it. Call for further details. New cost over $95,000.00, now only $46,000.00 OBO. Motor has been sitting and waiting for an eager buyer. Willing to make a package deal on the motor and other parts if interested.

Tires and Rims
One Set of Beadlock Weld Wheels 16” W/ Goodyear Slicks 17.0-34.5X16, 5x5 4 inch backspace $2200.00

Chassis car Stainless headers for Pro Mod Motor.Has plugs for O2 sensors and has collectors.
2 3/8 inch Side exit headers chassis car or Standard front BBC Chevy great shape $450.00( similar to Hooker)

2 3/8 inch chassis car headers Painted Black only $325.00

Liberty 4 speed clutchless transmission with Air Shifter includes air bottle and Trans Blanket and spare gears- $6500.00 like new

Turbo- 400 W/ ATI Transbrake and Bell, 2.48 gear w/ straight cut gears , p/g input shaft, 8”converter with 5500 stall, race clutches and steels, Roller bearings, -6an fittings and lines, deep aluminum pan, trans mount, trans cooler with fan and lines, 3 speed Cheetah GM shifter(70012) with air bottle and actuator. Transmission and all parts have a total of 10 runs and ran 8.70 in 3400 lb. car. All for only $2400.00

12 bolt Chevy braced rear end, 42 inches outside flange to outside flange.(36’ inside to inside flange). Moser 31 spline axles with Moser spool pro 4;56 gears and Wildwood Disc brakes with 5/8 lugs complete with Ladder bar and heims. (Ran 8.70 in 3400 lb. car) $1400.00 OBO

AFT 9 inch Triple disc clutch, stands with Lightweight flywheel set up for Chevy bolt pattern have additional discs and floater discs. Complete with clutch kit to include weights etc. $2500.00

Crower Dual disc 10 inch clutch with spare discs and floaters. Lightweight flywheel set up for BC/SBC. $1500.00

Strange aluminum 9 inch center section (new) with 40 spline lightweight spool and 4.10 x 9.5 Pro gears and case (35 spline yoke with sensor for racepak). $1500.00

New U.S Strange Pro gear 9.5- 3.89 ring and pinion (35 spline yoke) $450.00 (new $550.00)

New Pro gear 9” 4.30 ring and pinion (35 spline yoke) $350.00

Strange Ultra lightweight case with a Strange lightweight spool (no gear) (for 35 spline yoke) $900.00

8 5/8 Trick Titanium Bellhousing 6.3 set up for Chevy with Lenco or Liberty transmission. Certified in January 2016 for 1 year. Bell comes complete with a candlestick and crosshaft along with input sensor. $2200.00

Carburetor and parts-

Twin1050 QFT alcohol Carburetors (QFX 4710-A ) on top of a CFE Sheet metal manifold for short deck BBC (will fit any BBC Dart, Brodix or any Chevy style heads)
Set up is complete with carburetors, S/Metal intake, studs, gaskets, spacers and linkage all for just $2400.00 (Carbs alone are $1200.00 each)
Separate- Carbs- $1650.00
Intake only- $800.00

Magnafuel 4 port regulator $135.00

Magnafuel Quickstart 275 fuel pump Works great $225.00

Enderle Mech. Fuel pumps with Bypass adjuster and lines, belts w/ pulleys. $450.00

Jegs 10 foot -10 braided fuel line (New) $30.00

Ignition parts-

7AL-2 ignition attached to a panel plate with timing set, RPM and Retard switches along with a NOS progressive controller all for $750.00.(great deal).
(3) Three BBC/SBC Crank distributors (1) MSD 8489 $155.00 (1) MSD 84697 $170.00 (1) MSD 8558 Tall deck with 10.5 Moroso Wires $225.00

MSD 8860 replacement cable New $10.00

RPM activated Switch for magneto $60.00

Jesel Belt drive distributor includes belt, front drive pulley, bracket and new spare cap $375.00

Assorted MSD rpm chips- $30.00

Digital delay Crossover plus. $325.00

NOS Parts

NOS -4 Purge line kit New- $75.00

NOS Dominator plate with lines (no solenoids) single shot- $225.00

2 NOS 4150 Plates one with Solenoids and lines $275.00. (1) one NX plate 4150 with a cross bars (no Solenoids or lines) $175.00

NOS Dominator cross plate dual shot-$175.00

NOS Dominator plate for 250 shot with purge and solenoids.$275.00

(2) NOS 15lb Carbon Fiber bottles with High Flow valves and Gauge $425.00 ea.

(12) Speedtech 10lb (green) Nitrous bottles filled with high flow valves $165.00 ea.
(4)- 10 lb. NOS bottles (empty) 2 with High flow and 2 with regular valves $120.00
(2) NX 10 lb. bottles (empty) with High flow valves -$125.00 each
(2) 5lb Nos bottles with High flow valves, empty like new $80.00 each


Cloyes BBC steel quick adjust timing chain Like new $65.00

66 Chevy Nova front grill painted red $65.00

Racing radios Complete set Includes hardened case, headset for driver, remote button, earpiece and padding for the helmet, radio for Driver and Crew chief, holders for both radios, wiring for the car, battery charger for two radios. Set cost ($1900.00) Only $1100.00 (Works great).

Intercomp SW500 EZ weight Digital Scales $850.00

Meziere SBC water pump works great $200.00

ProForm Big block Chevy water pump $130.00

(Pictures to arrive soon)

Payment Details

TradesNot Accepted: May be interested in a Pro-Street Chevy vehicle of partial value and the rest in cash to me.
Accepted Payment Methods Paypal, Cash
Other: Bank Transfer.

Seller Notes

All large parts must be picked up by buyer or buyer to pay for shipping. May be willing to assist in delivery to neighboring states only.

Message Seller

Send Message

About The Seller

Member Since March 2003
Taneytown , MD 21787
Learn More
24 Honor Payments
Honor Member Bronze Seller Silver Seller Gold Seller Power Seller
Get Transportation Rates


Similar Classifieds
Email us - Support@racingjunk.com
Call us - 866.326.9227
Copyright © 2005-2017 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy

Execution Stats: 0.216 sec / 8.7 MB used / 9.0 MB peak