Complete 357 small block intake to oil pan with only 30 1/4 mile passes. Victor Jr CNC port matched to heads, cast iron World Products heads- ported, polished and bowl blended, .202 valves? not sure, 010 4 bolt main block, Mahle flat top pistons, Pankl rods, balanced GM forged 1182 crank. Valvetrain is a comp cams solid flat tappet, .532, .525 lift, 7/16ths rocker arm studs, comp cams rockers 1.6 ratio, 2 piece stud girdle. GM HEI distributor locked out with Taylor 10.5 racing plug wires, Deep 7 qt moroso aluminum racing oil pan, Edelbrock Elite tall valve covers, melling high volume oil pump, Proform electric water pump, new hughes 153 tooth SFI 29.1 flexplate. 11.1 compression, made approximately 450 hp on chassis dyno with a turbo 400 behind it. The engine ran consistent 11.70s in a 3400 pound camaro. Best time was 11.62 with more in it. Never been over 6800 RPM. Heads were taken off to see exactly what the rotating assembly consisted of, so it needs to be reassembled (intake gaskets, and head gaskets) Solid, good running motor. Call 219-851-7789 or send message. NO TEXTS, NO CHECKS, MONEY ORDERS AND WILL NOT SHIP
Accepted Good condition gas golf cart.
Expires on: 12/26/2016
Posted: 09/05/2016, ad expires in 61 days
Seller Information Ad posted by:
Member Since: 01/22/2011
Phone Number: 219-851-7789