Welcome to RacingJunk Classifieds, The World's #1 Motorsports Marketplace

For Sale: Mopar 610 ci Predator EFI Nitrous 1210 hp

Ad #182189024   Posted:2014-04-28 09:17:39
This ad expired 90 days ago.

Priced without EFI, this is from Dual Carb lid on intake with wet and dry nitrous to dry sump system, will sell headers for $2000 and with dual throttle bodies, fuel rails, reg, and 160 lb Billet Atomizer injection $2500
Above Added: Sat May 10, 2014, 7:56 am EST
Complete build is less than 1 yr old by Jeff Burns Racing Engines
Above Added: Thu May 8, 2014, 8:34 am EST
I have relisted the price for just the engine throttle bodies to oil pan without extras, I have the dual carb reversion lid if you prefer without EFI, other parts still available but trying to simplify the process, thanks and no offer will offend me, pics of build and all data available on request, shipping included anywhere in US

Above Added: Tue April 29, 2014, 2:57 pm EST
610 ci Predator EFI Nitrous Engine

MotorMade 1210 HP at 7600 rpm at 13.5:1, dyno sheet included
Ran 4.84 @ 145 mph on 40 jet @ 3350 lb on 275s and 149mph on 48 jet

Indy Maxx Alum Block tall deck 4.520" bore filled
4.750 Callies Crank NEW
7.150 GRP Rods 2.20 .990 NEW
14:1 Diamond Coated, Gas ported, lightened Nitrous Pistons (1 extra)
1.8 T&Ds NEW
Total Seal rings NEW
Cometic gaskets and extra intake gaskets
Bullet 55MM Roller Cam w roller bearings Specs available
1/2' Manton 165 wall pushrods (4 extra)
Comp Elite Roller lifters
Predator Cast Ported intake with CNC EFI lid with built in spacer
Predator heads Titanium valves/ PAC springs 534/403 cfm w flow data 55 cc chamber ( 1 off set by Finish First Racing Heads)

Dual Accufab 4500 Throttle bodies polished with linkage
Peterson R4 Dry Sump with Tank and overflow w 3 inline scavange filters
Innovators West custom balancer with built in Magnets
MSD Crank trigger
Jesel Belt Drive
Jesel Front dirve Distributer
Accel 8.8 Wires
Weldon EFI Reg plumbed to fuel rails
STAR Vacuum Pump with reg
BIllet Atomizer 160 lb injectors
Full set spare Manley Springs
Dual Carb Revision intake lid
Jeff Johnston custom welded Valve Covers w/ pan vac port
Engine diaper
One Stage Nitrous flowed up to 60 jet includes wet or dry set up, timing numbers available up to 48 jet/ all data included by Kevin Neal
Charlie's Custom Dry sump OIl pan
TCI Flex plate

Invested $51,000 in above

Also available below

Fresh TCI Pro X Nitrous converter ($1,500 new)
Proformance Turbo Glide 400 2 speed w brake and adj conv flash jetting 1.48 first gear ($6,000 new)
(18) extra 1.9 ratio T&Ds
4.750 Callies Crank .010/.010 fresh
GRP rods set refurbished
Powermaster XS torgue Starter
2 3/8" to 2 1/2" primary to 5" collector with vibrant muff Stainless headers ( cost $4000)
Extra CNC header flanges (2)
(2) 6an nos lines with 1/4 turn valves and liquid filled Induction Solutions Guages
(8) full 10lb nitrous bottles with blow downs ($1500 for all 8)
NMS 1000 Nitrous controller required for BS3 Injection low volatage output
BS3 Injection w/ nitrous upgrade available if interested

I can get any other specs needed from my builder Jeff Burns
I will entertain an offer on just engine, engine and any extra parts or everything above on this page.
I probably left something out, so don't hesitate to ask! LOL

Seller Phone Number: (662) 401-7708
This item is USED
Trades NOT ACCEPTED Payment options:
Item Location: FULTON, MS Get Directions To This City
Contact Seller
This ad expired 90 days ago.
From:    To: 

106 Main Street, North Adams, MA 01247
Toll Free: 866.326.9227 • Tel: 413.663.3496 • Fax: 413.663.3615 • Email: support@racingjunk.com

Execution Stats: 0.141 sec / 17.5 MB used / 17.6 MB peak