STEAL!! THIS 1300HP ALL ALUM 632 BY R&M
T/D--T/S FAST BRKT ONLY $26,500
* NEW Brodix 10.250 alum block, raised cam,55mm brngs
* NEW MGP Aluminum connecting rods 6.750x.990
* NEW Ross nitrous pistons 4.600
* NEW Trend Performance heavy duty piston pins
* NEW Total Seal rings .043, .043, 3/16
* NEW Clevite rod and main bearings
* NEW ARP head studs
* NEW Isky .903 Red Zone roller lifters
* NEW Comp Cams cam designed by R&M, in.894 lift ex.867
* NEW Jesel belt drive
* NEW Donovan front cover
* NEW Moroso 5 stage dry sump oil pump
* NEW Moroso dry sump oil pan
* Moroso 9 quart oil tank
* Moroso vacuum pump
* NEW XRP Hypalon, light weight hose and fittings
* NEW Fel Pro gaskets, Cometic head gaskets
* NEW MSD Crank trigger pick-up
* NEW Moroso Ultra 40 spark plug wires
* NEW Autolite spark plugs
* NEW Trend Performance push rods
* Brodix Big Duke 12deg alum heads, extensively reworked
for flow and nitrous by R&M
* Manley Titanium 2.550 x7.100, 1.860 valves
* NEW PAC-1248 triple valve springs 2.100"
* T&D BBC Brodix 12 deg rocker shafts system
* Brodix sheet metal valve covers
* Lunati 4.750 Pro Series steel crankshaft by R&M
* ATI Balancer
* ARP studs and bolts
* MSD low profile distributor
* Hogans sheet metal custom intake manifold, twin carbs
* Dual 1450cfm Holley Dominator, modified, reworked by R&M
* Aeromotive 4 port reg w/Russel hose and fittings
* CSR Pro Series alum water pump
** 1295.4HP @ 7600rpm, 965 lbs ft. @ 5500rpm
* This engine could be one bad ass player in Top Dragster, Top Sportsman, or fast bracket racing. You can have intake plumbed for nitrous fogger system for even more power!!
** This engine has the potential to be a 6.60 player in T/D in the quarter mile without any power adders, on motor only. 4 teens--4:20's in 1/8 mile in T/D
** This engine has been built by R&M from the ground up. These heads have been extensively reworked and modified by R&M for potential nitrous use. Cam, heads, and intake manifold are designed to work together. Call Larry at R&M for additional details.
** Engine runs on VP C-15 racing fuel
** NO RUNS ON THIS ENGINE EXCEPT FOR DYNO TIME
** ASKING $26,500 FOR ENGINE OR "BEST" REASONABLE OFFER. NO TIRE KICKERS, NO TRADES, SO DON'T ASK.
** To build this engine it would cost you way more than
what I am asking.
This engine has mostly new components, only heads,
manifold, carbs are not brand new.
* I ALSO HAVE SEVERAL OTHER PARTS FOR SALE, AS FOLLOWS:
* 1 PR.DRAGSTER, RUBBER FRONT WHEEL CRADLES $75
* 1 DRE DRAGSTER COCKPIT COVER $55
* QA1 DOUBLE ADJ SHOCK (USED FOR UNDERCOVER SWING ARM
MONO SHOCK SET-UP $75
* 2 PR DRAGSTER TIRE COVERS, BY JEGS & SUMMIT $20 PR
* 1 COMPUTECH VRT ( vehicle reaction tester) $50
* 1 Engine diaper, BBC $35
I HAVE 2 SETS OF COMP CAMS ROLLER LIFTERS, VERY GOOD
CONDITION AND COUPLE OF SETS OF VALVE SPRINGS.
ASKING $300 FOR EVERYTHING.
HAVE 4-5 LUNATI BILLET STEEL CONNECTING RODS AND 4-5
OLIVER BILLET STEEL RODS WITH PISTONS, ANY OF THESE
COULD BE VERY GOOD FOR SPARES. MAKE OFFER
** SHIPPING WILL BE PAID BY BUYER ON THE PARTS.
Seller Phone Number2: (641) 454-2359
This item is USED
Trades NOT ACCEPTED
Instructions for buyer: Will discuss delivery of engine
Ad posted by:
Member Since: 2003-01-11
Phone Number: (641) 420-2485
Phone Number: (641) 454-2359
Number of Honor Payments: 1
Average Accepted Sale Price: $500.00
Average Honor Payment: $5.00
- Member has no other classified ads.
Report the sale - click here