For sale is a K6 1000 complete chassis (no motor) with some spare parts. The setup is as follows:
Internally lowered (1 inch) and re-valved fork (stiff). No strap required.
8 inch stretched and modified factory swing arm with McIntosh chain guard. The arm bracing was modified to clear the factory voltage regulator when the bike launches, and a set of pegs were mounted to avoid the noodle leg syndrome.
Race tech valved rear shock (drag race valving) with a schrader valve to set the gas pressure.
Currently the oil cooler is mounted in the rear of the chassis and the body has a belly pan attached with 1/4 turn fasteners (the front of the body is sealed under the radiator).
EK DR-Z chain.
Michelin pilot 120/50 series low profile front tire.
190 shenko U soft rear.
-4 AN nitrous fuel pump feed line welded into the fuel tank.
I dropped the bike when it had less than 1000 miles and had to replace the left front fairing (lower). The clutch lever knob is rashed, along with the front upper fairing, and the left side of the fuel tank. The Sidi sticker covers the damage to the tank. The left side rear fairing and shift lever were replaced. No insurance companies were involved.
Spare parts -
The chassis comes with everything mentioned above plus a spare ECU from a K5. Two wiring harnesses - one is a complete stock harness, the other was the original that came with the bike and suffered its racing phase.
All of the stock parts to put it back in the original configuration except for a radiator. The motor sold with it.
Smoke double bubble windscreen (not shown in photos, brand new).
PM me with offers. I'm asking 3500 obo. It's not in perfect shape, but it cleans up VERY well and is in immaculate shape considering its use. I really wanted to hang onto it and throw an 07/08 motor in it, but I really need a house down payment more! If you get it I'll happily share the setup notes on the
bike. As I'm sure you guys know, selling these things when you've had them for years stings. Help me find a good home for it.
The bike is located in Cleveland Ohio, and I would prefer if you guys either pick it up or arrange to have it picked up by vehicle transport. If you're within a couple hundred miles I'll consider delivering if you pay full price.