My 63 Chevy II is a turn-key, race ready tube chassis car that comes with a 498ci bbc including:
The engine is a stock Mark IV block bored .070 with 2 bolt mains using ARP studs
Brodix Race Rite heads, professionally ported
Racetec forged pistons with 13+ compression
Scat rotating assembly with H-beam rods
Custom ground rollercam, profile designed by Chris Straub
Ported Brodix 4150 intake with 1000cfm Pro Systems Holley
Bo Laws belt driven fuel pump
MSD 6al ignition with a two step
Transmission is a Powerglide with 1.80 straight cut planetaries in a Reid case - Pro Tree Brake - Vasco steel input shaft and 8" PTC converter
Rollcage was formerly certified for 8.50 quarter mile
Has a Dana 60 rearend with 4.88 gears
Fresh set of 14x32 Hoosier slicks (less then 20 passes)
ladder bar rear suspension with single adj. shocks
Wheels are by Holeshot
Borla XR1 mufflers.
Car weighs 2800 lbs with 200 lb driver and runs 5.80s with a 4150 carburetor (will go faster with a Dominator)
Been running footbrake with it but the car would make an excellent 6.00 index car. The car has less than 20 passes on current motor and transmission.
Bill of Sale only--car is not titled.
Expires on: 10/21/2016