Hand built TRIBAL theme blower bike.
Fully registered in Florida, with title in hand. NOT A KIT BIKE
If you live in the area and attend any of the top bike shows you have seen this bike,
here is your chance to own a TRUE one of a kind hand built custom.
This bike has won many trophies including first place (top honors) at
Palm harbor bike fest 2007, 2nd place over all cody river bike fest 2007,
and first place at every local bike night in the area.
This custom was hand built by myself and dream cycles in Port Richey Fl.
I am a CNC machinist by trade, all of the one of a kind CNC parts were
built in my shop over the last 5 years, everything is of the highest standards.
All the aluminum is high polish and the chrome is perfect, all the powder coating
is violet candy, and can be seen all over the motor, trans, and blower.
I am selling the bike because of starting a new project this year, a 34 low boy
Street rod, and I just cant afford to own two many toys at once.
The motor is 104 S&S stoker with 8.5 to 1 compression to support the blower,
Full polish, power coated jugs with highlighted edges, heads were flowed by branch,
Siften cam, full electronic ignition, professionally built at Dream Cycles. $5500
The blower is from a ford mustang or lighting truck, it is an eaten unit with full
power coat and detail work, running around 6 psi, air enters the blower through
Weber style velocity stacks. $1000 in parts and thousands $$$$ in labor.
The intake and exhaust manifolds are one of a kind CNC parts, including the blower drive
with Stainless Steel shafts to hold the hand made pulleys running full machine bearings,
even the power coated belt drive has Auto Meter gauges built into it.
I have used the blower on the street many times, and it
runs great, it takes about 3 hours to bolt it on and is a true show winner and hit with the crowds, but
most of the time I run it without for day to day use.
Carb is SS super G modified to be used with the supercharger, $400.
Trans is a 5 speed Andrews with full polish cases. $1500
BDL 3 “ Open Belt Drive $1500
Wheels are Performance Machine tribal design $1000 each, and include matching disks and rotors,
17 inch 180 sport bike tire in the back, 21 out front.
Brakes are all Performance Machine. Calipers and disks include a $650 left sided pulley brake combo,
with a $400 pulley, disks are $300 each, calipers are $400 each.
Frame is Rc Components ridged $1,500 with $2,000 worth of custom mods done at a racecar shop,
the oil tank is blended into the frame and stretched to the axle, under the seat is a flush door
With aircraft locking fasteners, all welding was tig and ground by hand,,,,, no bondo here!!!!!
Front end is all chrome with 5 degree trees, with internal built in neck stops,
is 42 deg. $1000.
Bars are hand made by me starting with Arlen Ness bars cut into many parts then welded
Together with a handmade 5 inch housing for the monster Tach, the housing also has the
Tribal theme continued. $500 tach and $500 for bars and labor.
Hand Controls are Arlen Ness, foot controls are CNC custom. $500
Lights, Headlight is headwinds, $500 and rear are all LED with custom mounting.
and a full set of built in blue LED’s to light up the motor at night!
The Gas Tank started as a sportster tank that was stretched and molded by Dream Cycles,
Pingal petcock and custom one bolt mounting included. $800 parts and labor.
The Paint is truly one of a kind, marble antique gold with violet tribal graphic floating on top.
It is the topic of every conversation when I pull up to a bike night, day or night it really pops.
The paint cost me $3500 and has to be seen to be believed.
Parts included in the tribal theme are the wheels rotors & brakes, pulley, bars, frame, seat, mirrors,
paint, and carb cover.
I have $18,000 in receipts not including the paint, (that was a cash deal as were some of the parts)
and countless hours in Design and CNC work,
Here is a inventory of the value of the bike.
-----$4400 in wheels, brakes and rotors.
-----$10,000 in motor, trans and driveline, starter, charging system, carb and supercharger.
-----$7000 in the frame, front end, bars lights, and custom work.
-----$3500 in paint.
So here is $24,000 easy in parts, not counting endless odds and ends, not counting the labor
working on and off for 5 years to build the parts for this one of a kind supercharged show bike,
that runs great, drives straight as an arrow, starts every time, and turns heads everywhere you go.
I can send you as many pictures as you like, the bike can be seen in New Port Richey fl.
Call me at 727-207-1837
Please, only serious inquires
Accepted hot rods, sports cars, street rods.
Posted: 10/12/2016, ad expires in 71 days