35 SPLINE AXELS (STRANG)
TESTABLE AT BUYERS ESPENSE.
TEXT 405-212-0513 OR SEND EMAIL firstname.lastname@example.org
Lowering price $17.000
All paper work on complete build!
Buyer pays shipping!
Above Added: Thu October 20, 2016, 1:37 pm EST
the car was built in the 405(OKC,OK)at the shop of tall paul.(Martins pro street rods).
The machine work on the engine was performed at Boyd's Racing engines in Norman,OK.
The car has the best of everything as far as racing equipment.
Engine- Merlin 3 BBC block. Priorty main oiling.
Big Brodie BB3 Brodix heads also worked by
boyds.stud girdles by Brodix. Forged crank and rods
by Eagle. Manley 14-1 dome pistons.
bullet 818 lift solid roller 7/4 swap cam.
Tranny- 2 speed pro glide.TCI 1200 H/P input shaft.
180 straight cut output gears.Hipster pro brake.
JW Ultra bell and aluminum tail shaft with
Daytona roller bearing.
Rear end- Strange 9in back braced rearend.Aluminum
thru bolt center section with 4.88gears.
Upper and lower control arm pocket have
been braced.We also installed a drag link
bar to the rear end.New 5/8 studs. weld
15"/10" wheels on rear with 10.5 m/t tire.
and weld and M/T front runners.
we also have a strang C-M driveshaft.
Ignition- MSD 7AL-3 Box with two step switch.We
have two red top optimum batterys over
each wheel well for weight distribution.
Fuel- Aeromotive A2000 pump with return line.
If you have any other questions call me
at 405-212-0513 or 256-929-1263.