Welcome to RacingJunk Classifieds, The World's #1 Motorsports Marketplace

For Sale: 1968 Chevrolet C10 Pickup

Shortbed Fleetside A/C Air Ride


Ad #182264666   Posted:2014-08-16 18:11:24

This ad expires in 46 days.
$59,900.00


Call 937-371-3957
1968 Chevrolet CST C10 Short Bed Fleetside
Driven 8k plus miles Trouble Free While Maintaining Show Condition
Pro Tour Highway Ready in Ageless Style
Google Phone Number For Youtube Video of Truck
Also Can Email Links To Photobucket Album With 700 Plus Photos Build Through Current
383 Fuel Injected Tunnel Ram V8,Overdrive Automatic,Factory A/C,Power Disc Brakes,Power Steering,Power Windows,Programmable Air Ride Technologies System,Sony Concert Stereo,Staggered Wheels,Relocated Stainless Fuel Tank,LED Tail Lights
This story started life in December of 1967 in Stockton,Ca when this truck was sold new as a 1968 Chevrolet Long bed C10 CST equipped with 327 V8 , powerglide transmission ,factory A/C , power steering and brakes, and factory bucket seats with console.
Now the story jumps 36 years forward to when Doug Times found this truck in Concord,Ca with its original black license plates still currently registered.He strikes a deal with owner for the truck along with a short bed rolling chassis,bed floor and sides.After which he purchases a trailer and hitches it to this truck and drives 2313 miles,using 244 gallons of gas,back to Ohio so the transformation can begin.
There are 600 plus very detailed step-by-step photos of the build available along with 100 plus current photos taken this month.There is a detailed video of the truck that was shot this month,besides the truck being readily available for personal inspection by appointment.
And finally for the best part of this story to explain in detail what was done and how it was done.


Body
> marker lights removed from bedsides and fenders
>gas filler removed from cab
>antenna removed
>CST door badges removed
>rear wheel wells tubbed 1 ⅝ inches each side
All body modifications were completed and photo documented.Then all sheet metal was chemically stripped by American Metal Cleaners in Cincinnati,Oh.Then all body panels were E-coated by Mayflower Vehicle Systems in Norwalk,Oh (same process as $200k 2004-2006 Ford GT).Once the E-coating was oven cured all seams were seam sealed by Mayflower and the re-baked in the oven again.Then the body was painted fully disassembled with cab on a rotisserie.

Chassis
Started with 1970 Chevy shortbed chassis that was towed home from California.
>front lower control arms narrowed ¾ of an inch
>front upper control arms narrowed 1 ½ inches
>upper and lower ball joint angles were corrected
>rear trailing arm mounts were switched side to side and flipped upside down to correct pinion angle
>Air Ride Technologies air bags installed on all 4 corners
>C notch kit from Classic Performance Products installed in rear frame
>all brake and fuel lines plumbed in stainless tubing, flex lines are braided stainless
>front has 5 lug disc brakes from Right Stuff Detailing,along with McGauffeys 2 inch drop spindles
>Front end utilizes factory sway bar
>rear end in 1968 GM factory 12 bolt with Eaton Gear 4.10to1 posi unit
>rear has custom fabricated panhard bar
>wheels are Wheel Vintique GM Rallys Front 15x7 Rear 16x10
Once all the frame and suspension modifications were completed 112 items were delivered to Aesthetic Finishers Inc in Piqua,Oh to be powder coated “black velvet”.These 112 items included things such as seat frames,core support,drive shaft,axle housing,spindles,drums and more.


Engine
>GM 350 4 bolt main block stroked to 383
>Eagle cast crank and forged rods
>TRW forged lightweight pistons 10.75 to 1 compression
>Comp Cams roller hydraulic cam
>Comp Cams chrome moly full roller rockers and pushrods
>Custom fabricated aluminum tunnel ram fuel injected intake
>custom electronic fuel injection using GM ECM
>custom fabricated aluminum valve covers
>Billet Specialties “Tru Trac” billet serpentine accessory drive
>aluminum reverse rotation water pump
>”Sweet” power steering pump
>custom fabricated equal length long-tube step-tube headers
>B&M oil super cooler
Once all machine work was completed on the engine block it was fully polished inside and out prior to being painted to match truck.

Transmission
>GM TH700R-4 overdrive unit
>B&M trans super cooler plumbed with stainless lines
>unit built by Thoma Garage in Miamisburg,Oh


Interior
>original factory bucket seats and console nicely recovered in cloth
>fuel tank removed and replaced by custom fabricated stainless tank under the bed
>Dynamat Extreme Insulation applied to every surface even the inside of the doors
>complete custom Sony sound system with 2 amps,1600 watts,6 speakers,and auxiliary input
>Electric Life power window regulators with custom window switches utilizing window crank handles for appearance
>air ride control panel along with remote controls for air ride
>GM tilt column with overdrive indicator
>original style factory gauges including tachometer


In closing this is a rare opportunity to own a truck that has lived a good life before being meticulously restored and modified by a very talented individual and then test driven 8k miles to make sure how it would hold up and stand the test of time.Now is your chance to own and drive this truck.
Call 937-371-3957



Seller Phone Number: 9373713957
This item is USED
Trades NOT ACCEPTED
Payment options:
Item Location: DAYTON, OH Get Directions To This City
Contact Seller
This ad expires in 46 days.
From:    To: 
Seller Information

Ad posted by:
cadillacsean (#464444)
Member Since: 2010-03-02

Phone Number: 9373713957

Member Feedback
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00

Contact Seller
Facebook
Twitter
Print Ad
More
Enter Friend’s Email:

DID YOU BUY THIS ITEM?
Report the sale - click here



RacingJunk.com
106 Main Street, North Adams, MA 01247
Toll Free: 866.326.9227 • Tel: 413.663.3496 • Fax: 413.663.3615 • Email: support@racingjunk.com

Execution Stats: 0.410 sec / 16.3 MB used / 16.4 MB peak