Up for sale we have a 1957 Chevy Black Widow clone. Itâ€™s laser straight with good lines and great fit of the panels. Everything is covered in the Black and White Two Tone scheme. The paint has a deep rich shine that shows very well. When you look at the stainless it looks very good with some appearing new. The bumpers are new as well as other chrome. The final touch is the steel 8â€ťs that are painted white with the small hub caps and BFG tires. Everything on the inside appears to be correct form what we have seen. Itâ€™s done with the 150 covers and door panels that are done in black with gray and black inserts. When you look at the dash itâ€™s done in the correct black and gray as it would have been. This is a radio delete with only a set of aftermarket gagues under the dash. The 4 Speed shifter looks correct for a bench seat with the white knob. Under the hood itâ€™s powered by a small block V8 thatâ€™s mated to a Muncie 4 Speed trans and a late model 10 Bolt Rear End. The engine is dressed with vintage aluminum fined valve covers and breather. It has an aluminum intake and a Holley carb. The exhaust flows through headers and a set of Flow Masters. It has electronic Ignition and the charging system was changed to an Alternator. When you look at the bottom of the â€™57 everything appears solid. If we can help you in any way with questions or a specific picture, you can call our office at (865)988-8088. Or feel free to call Daniel at (423) 807 0600, Devvin at (865) 256 2366, or you can e-mail us at firstname.lastname@example.org.