For Sale: New Eliminator SR Ford 429 460 block
Barnett High Performance
We build Ford! We have many other items for sale for engines. We are clearing out many parts. If you are looking for something let us know. Shipping to a business with loading dock or forklift in the lower 48 states will be around $150. All other places will need to be priced out. Questions call us at 517 719 5185.
This add is for the brand new Eliminator SR block or Street Race.
We can get you anything from the Sportsman block to the Premier CG block rated at 3500hp. Let us know.
Eliminator sells the best 460 blocks on the planet.
Their website is www.eliminatorproducts.com
This is rated for 1800 hp.
It has priority oiling on the mains.
It has had the 160 oiling system done to the mains where the oil can come into the main bearings in 3 places.
Option: Main bearings with the 3 oil holes.
It weighs around 280 pounds.
The cam bores have been bored and line honed for roller cam bearings.
Option: we supply the roller cam bearings
Option: Can be ordered at no charge to fit regular non roller bearings
The blocks come square decked to 10.322
The mains have been line honed.
All 5 main caps are 4 bolted.
Option: Dowel pinned main caps
.800 thick head decks
Screw in freeze plugs
Super thick Siamese cylinder bores comes with 4.355 can go to 4.7
It can be anything from 429cid with a 429 stroke to 659cid with a 4.75 stroke
Comes Cast iron high nodgular
Option: CG or compressed Graphite $300 changes power rating to 2800hp. This new material makes the block much harder and stronger. It also reduces wear on the block because it is so hard.
We are a dealer for Eliminator. If you came to the IMIS show in Indianapolis then you probably seen me (Tim Barnett) there selling these blocks next to the owner. You might ask why an engine builder dealer would drive 4 hours to stand at a booth all day? Well I sell and use these blocks because I believe in the quality of the casting and in Eliminators in house machining. I also believe in the high integrity to the owner Michael Bowery.
If you need anything to complete you build let me know. We are engine builders but we sell parts too. At Barnett High Performance we have been building 460 based engines for 19 years. We can help with parts or the complete engine. Then we can tune on our in house dyno.
Lets compare the SVO block to the Eliminator block about the same cost right.
SVO M 6010 A460 Eliminator SR
Cost $2395 plus S&H $2350 plus S&H
Priority mains yes yes
4 bolt mains 2 3 4 main cap all 5
bore shipped 4.36 4.355
Max bore 4.6 4.7
Siamese bores yes yes
Cam bearing capable standard bearings standard or roller
main cap materials nodular iron nodular iron
grooves 160 oiling no yes
reinforced motor mounts no yes
finish decked as shipped no yes
Finish line honed mains no yes
consistent to advertised max bores no yes
max stroke 4.5 4.75
upgradable no yes
18 head bolt yes no see ultra block
This item is NEW
Trades NOT ACCEPTED
Ad posted by:
Member Since: 2008-07-06
Phone Number: 517 719 5185
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00
Report the sale - click here