Welcome to RacingJunk Classifieds, The World's #1 Motorsports Marketplace

For Sale: PRO-RACE SBC 4 BOLT BLOCK--$200. OFF 1 WEEK !

NEW--COPYof DART LIL M-BILLET STEEL SPLA CAPS


Ad #182262419   Posted:2014-09-22 20:04:55

This ad expired 1 days ago.
$999.99



.


**** "1" WEEK SALES PROMO....PRICE on Bare Unmachined Block...REDUCED by...$200.OFF....ALL blocks will Require Professional & Accurate Machining before use.

..$200. OFF Offer DOES NOT apply to MACHINED BLOCKS...ONLY to Blocks SOLD NOT MACHINED !

..CANNOT BE COMBINED with any other Offers or Discounts or Allowances or Credits !

..There is a $40.00 Crating/Boxing/Skidding Charge per block

...Shipping/Insurance is EXTRA !

..NO CREDIT CARDS...ONLY..PAYPAL & US POSTAL MONEY ORDERS ACCEPTED for Payament !

THANKS>


.
Above Added: Mon September 22, 2014, 8:36 pm EST



**** "NEW" ..."PRO RACE" series Iron Hi-PERF/RACE HEAVY DUTY 4 Bolt STEEL Main Cap Blocks... These SB Chev Blocks feature stock deck height & cam Location & lifter bores...EXTRA CAPACITY COOLING SYSTEM...Have PRIORITY MAIN OILING SYSTEM...THICK Cyl Walls that Can be Bored safely to 4.185 & EVEN 4.200 max out & Are Already CLEARANCED for up to 3.750 Stroke Crank & will CLEAR up to 4" STROKE Cranks WITH Additional Clearancing...Stock Pan Rail Spacing..These blocks feature 350 MAINS ONLY...Extra BEEFY Bulkheads...ALL Blocks COME WITH... 5 "BILLET STEEL" 4 bolt MAIN CAPS with the Centre 3 being "SPLAYED"

... We SELL these Blocks..."TWO" WAYS...UNMACHINED "AS IS" & a "Limited Specific Warranty"... "OR".... FULLY "MACHINED" & "RACE PREPPED"..COMPLETELY READY for you to ASSEMBLE along with a Manufacturers "FULL WARRANTY" against defects in Materials & Workmanship!

>>>...blocks come with regular 350 bore roughed in at approx 3.990" & Big Bore roughed in approx 4.115" ..Blocks can be BORED to MAX of 4.185 ( Some to 4.200)

..These blocks will handle up to approx 1150HP OUT of the BOX "OR" approx 1350HP w/Upgrade to ARP MAIN STUDS..Blocks are Drilled & Tapped so ALL Factory BOLT-ON Brackets & Accessories will BOLT-ON !

..The MACHINING Consists of LINE HONING of MAINS...TORK-PLATE "BORING & HONING" of Cylinders to "YOUR CHOICE" of STD Bore (4.00 or 4.125) OR .030 over ( 4.030 or 4.155) or .060 over (4.060 or 4.185)>>(OTHER Bore Sizes Available for Extra $) ...LIFTER BORES are HONED to SIZE..Freeze Plugs Installed..Dart Style CAM BEARINGS Supplied & INSTALLED..DECK Height is Checked &/or Machined/Surfaced to target Spec's 9.025....Block is Washed....."READY to ASSEMBLE"

STROKER CLEARANCED for up to 3.750"..WILL ACCEPT up to 4.00" STROKE with Additional Clearancing...You can SAVE $$$ & grind the Clearance Yourself "OR" We can Professionally Machine The Extra Clearance Required for your Crank Stroke for "EXTRA" $169.99

----"READY for ASSEMBLY"


EXCELLENT CHOICE for Super Pro Bracket Racers or PRO Street Engines or Many Classes of CIRCLE TRACK.... even MARINE Use !!

You can build anywhere from 302 up to 440 Cu In !

>>>> These Blocks are Purchased off shore from our Supplier based in Australia !


*** FOR BUDGET Minded RACERS who STILL want a RELIABLE BLOCK without paying an arm & a leg & breaking your bank account.


--PROMO PRICES... 2 "CHOICES"

...Purchase Block in "AS IS" Condition...NOT MACHINED & "Limited Specfic Warranty"...$1199.99

..."OR"

... Purchase Block... "FULLY MACHINED" & "RACE PREPPED"--READY for ASSEMBLY ..WITH a Manufacturers "FULL WARRANTY" Against DEFECTS in MATERIAL & WORKMANSHIP !

.....ADD $409.99

Shipping/Crating Costs are EXTRA


..Blocks are Shipped from fob California &...Must be Shipped to Commercial Address "OR" WE Can arrange for you to Pick-up at Nearby Transport Terminal

Shipped FOB Origin California


Thanks

.........BLOCK SPEC & INFO SHEET............

Small-Block Chevrolet


Bore: 4.120" or 3.90" unfinished
Bore & Stroke: Max 4.200 x 4.00" max recommended
Cam Bearing Bore ID: 2.00"
Suggested Cam Bearings: Durabond DT-1-1T
Cam Bearing Press: .002"
Cam Journal O.D.: 1.869"
Cam Plug: 2.375" dia. cup plug
Cylinder Wall Thickness: .250"+ @ 4.185"
Deck Height: 9.025"
Deck Thickness: .625+"
Fuel Pump: Mechanical pump boss incl.
Fuel Pump Pushrod Length: Standard
Freeze Plugs: Press in cup style
Lifter Bores: .842"- .843"
Main Bearing Bore: 2.649"(350)
Main Bearing size: 2.450" (350)
Main Cap Press: .004" - .006"
Main Caps: BILLET STEEL 4 bolt (5)
Main Cap Register: Deep Stepped, no dowels
Oil System: Wet Sump - Priority Main oiling (Also Dry sump)
Oil Pump Shaft: .481"(350 main)
Oil Pan: Standard SBC
Rear Main Seal: Standard SBC 350
Starter: Standard SBC
Stud Holes: Blind Head stud holes
Timing Chain/ Gears: Standard SBC
Timing Cover: Standard SBC
Torque Specs: 7/16" bolts - 65 ft. lbs.
3/8" bolts - 35 ft. lbs.

Thanks



Business Phone Number: 519-647-2568
This item is NEW
Trades NOT ACCEPTED
Payment options:
Item Location: PIQUA, OH Get Directions To This City
Contact Business
This ad expired 1 days ago.
From:    To: 
Business Information

Ad posted by:
murray (#757)

C.A.M. Performance
(519) 647-2568
Business Storefront Contact
			Dealer
Business Website
Member Since: 2002-12-31
Phone Number: 519-647-2568

Member Feedback
Number of Honor Payments: 8
Average Accepted Sale Price: $8,653.43
Average Honor Payment: $80.50

Gold Seller
Facebook
Twitter
Print Ad
More
Enter Friend’s Email:

DID YOU BUY THIS ITEM?
Report the sale - click here



RacingJunk.com
106 Main Street, North Adams, MA 01247
Toll Free: 866.326.9227 • Tel: 413.663.3496 • Fax: 413.663.3615 • Email: support@racingjunk.com

Execution Stats: 0.369 sec / 16.0 MB used / 16.1 MB peak