I have recently finished the repair on the block and it is ready to go Bore is approx. 4.312", deck is standard as is the cam location. The price includes a set of head studs. If the studs are not the right length for your application, I will keep them and drop the price to $2500.00. One sleeve has several scratches near the top of the bore, but they should not be a problem. All welds are 100%, I don't do patches with weld inside and out. I don't know the exact main to deck centerline measurement, but I would assume that an undersize crank gear would possibly be needed for the gear drive. Also, I have had some requests for pics of the repair on the main oil galley side. I weld these areas and then redrill the galley afterwards. I have been repairing blocks and heads for over 30 years. I can provide more pics upon request. I will not ship until payment has been cleared. Thanks, John.
Seller Phone Number: 9188361111 This item is USED Trades ACCEPTED: In some instances I would take damaged aluminum blocks/heads as partial trade, depending on the condition. Payment options: