FORD RACING 302 CUBIC INCH 345 HP BOSS CRATE ENGINE
B303 Camshaft - Manual Transmission ◾New BOSS 302 crate engines feature race quality components at competitive pricing.
◾Utiilizing all forged internals the X302E and X302B crate engines are an excellent value and a solid foundation for any performance combination including forced induction.
◾302 cubic inches
◾9.0:1 compression ratio (nominal)
◾Forged steel connecting rods
◾BOSS 4-bolt main block M-6010-BOSS302
◾Hydraulic roller camshaft M-6250-B303 , .480" lift intake and exhaust, duration at .050" is 224 degrees intake and exhaust
◾Double roller timing chain set M-6268-A302
◾Forged steel crankshaft
◾Rear sump pan fits most Fox body cars
◾Ford Racing aluminum GT-40 cylinder heads M-6049-X306 with 1.94" intake valves and 1.54" exhaust valves
◾Roller rocker arms - 1.60:1 ratio M-6564-B351
◾Includes M-6375-D302 steel flywheel
◾Does not include intake manifold or distributor (MSD Part no: 8598 recommended)
◾Built with all NEW Parts
◾Can be used in kit cars, street rods, Mustangs, Fox-bodied cars, and trucks
INSTALLATION NOTES: Some or all of the following items may need to be changed from your original engine or modified for proper installation:
◾Depending on your application, a different timing cover, water pump, oil pan and pickup may be required.
◾Engine has a rear sump oil pan and pickup, standard rotation timing cover, reverse rotation water pump and non-EFI valve covers.
◾Timing cover will work with most standard rotation water pumps
◾Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump
◾A reverse rotation water pump is installed. Other applications may require different water pump and timing chain cover.
◾Valve covers M-6582-W351PR should fit most non-EFI applications. Optional valve covers sold separately.
◾The damper M-6316-D302 may require a spacer for pulley alignment.
◾Flywheel included M-6375-D302B should work for most 157-tooth manual transmission applications. For other transmissions use the proper neutral balance flywheel.
◾Intake manifold not included
◾Includes intake gaskets M-9439-A50 and pilot bearing
◾Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order)
◾Steel distributor gear required
◾Shipping weight approximately 525 lbs
◾Built with current available parts. Photo and specs may vary.
◾Engine installation tuning tips at www.fordracingparts.com
Contact Lonnie @ 386-843-8009 to place your orders.